Dream Office

Soldato
Joined
7 Jan 2003
Posts
4,458
Location
Gold Coast, Australia
Hi all,

Being a long time OcUK member, somewhere in the region of 17 years, this is my first time documenting a full build.

I have been planning a custom built office for a couple of years now and have been holding off on a full system upgrade for even longer with the view tech wasn't quite where I wanted it to be where it ticks all boxes.

This year I think the tech gods have aligned and pending availability I am hoping to have everything up and running by early 2021.

The office was recently finished and consists of a 3000mm x 850mm custom-built desk using a kitchen benchtop to achieve the large size and waterfall end. Cabinetry has power and CAT 6 networking hidden in it which feeds through a cable pass through into a custom-built cable tray running around the entire side and back edge of the desk. It also has LED strip lighting in the display cabinet which is customisable but is set to automatically comes on at sunset and go off at 11pm.

ACtC-3c5cPAf44cRssd2w9zDtnkkCd4XTuyGaV8dvfb1vID8EYJC37hki5dElP2HkD1tFMNNY6nP7DEw9pNhnEPdqMt1zuQeV2ZTFg9Y5GrNW0UlGSJgc2iIvbAg239q3wvUeHngR2X66e6luqyVRzdHOeXK=w1250-h937-no


ACtC-3cvImWOQMkeLHVeho2moOglgZGaUcNVoOePDWnpk9uP1fQ3X6y8ikiP7NVrqBVMBWebgVzIBfbpQjjdmG8zAt5uWRqwbE_2pIdjF2gtZOZZ4pG673UkHZe5Zl8pmF_gi9HYHcFbxBHNMXfIap8_0wRK=w703-h937-no


The plan is to have a virtually wire free office setup with either the monitors mounted and cables running through the wall into the hidden cable tray under the desk or having the monitors on the desk with cable pass through's drilled through into the cable tray. With the planned case being an NZXT H1 the cable ports are all located on the underside of the case so I plan to position the case directly over a cable pass through hole so all cables will also go through to the cable tray under the desk.

Setup as follows marked out in the photo for dimensions:

ACtC-3cbuWHos3VhMdnagTdeMBBRqPE9zHVSBjWQe2Z_LiWYlniZ2b3CbP6fADv1nMGI_MpdaNFbUOujNT5m4dQ2h2fsfvSsRiw0uzTw6C2UTwYC0xk6UCv1ZpOFvkEhNexTcP0MY3HjNaifQgfruRgWNL3z=w1250-h937-no

  • Left will house an Ultrawide LG 38WN95C 1ms IPS 3840 x 1600 @ 144hz USB C
  • Square in centre will house the main PC (NZXT H1 Case) and will be connected to both monitors build below
  • Right will house a Super Ultrawide LG 49WL95C 5ms IPS 5120 x 1440 @ 60hz USB C
  • Far right is Dell XPS 13 which will connect to the 49" through a single USB C cable.
  • White chairs are there for context as I have two NeueChair Obsidians on their way
The build I am planning in the NZXT H1 is as follows, it would be great to get some feedback on it as I am still not 100% sure on everything at this stage.
  • NZXT H1
  • AMD Ryzen 9 5950x or the 5900x (undecided at this stage, will obviously wait for reviews too)
  • ASUS ROG Strix B550-I Gaming Mini ITX
  • Corsair 32GB (2x16GB) CMK32GX4M2B3200C16 Vengeance (could do with some help here)
  • Samsung 980 Pro 2TB (when this comes available)
  • Asus 3080 TUF or AMD 6800 XT or 6900 XT (pending reviews and availability)
  • Logitech G915 Lightspeed Mechanical Keyboard
  • Logitech G903 or G703 Lightspeed Mouse
  • Headphones (I would love some advice on these)

Below is my current home networking a little messy I know:

ACtC-3eKquLjl2RRS7NV1UWoz3hRDoBdl1mpdaGwBFmG8zXiGeXBaYFKFquqIED22Sa62eG1YvY5FY1x61EOYKVgTqCXntIROGk9VOR8qqif61hYYuY_C4SjEH-b43dpdJTEeDrt2Fpy7izY2wNZK9rAKvCL=w1250-h937-no

  • House is fully wired in all rooms with CAT 6
  • Asus RT-AX88U
  • 16 Port TP Link Gigabit Switch
  • 5 Port TP Link POE Gigabit Switch (for security cameras)
  • Synology DS 1817+ - 7 x 8TB drives in SHR (48TB usable) + 1 x 6TB for backup and camera surveillance + 1 external Samsung 1TB drive for portable overnight backups
  • Backup UPS for Synology

Any feedback or thoughts would be very much welcomed.
 
I am pretty sure it is deep enough at 850mm.

The end of the longer bits of card indicate where each monitor will finish with the stand at its deepest point. The smaller bits of card indicate the depth of each monitor without the stand but not including a wall mount.

Undecided at this stage whether I will wall mount them both or have them on the desk, will see when I have them both.
 
@demon8991
checked out the b550 aorus itx ?

https://www.gigabyte.com/Motherboard/B550I-AORUS-PRO-AX-rev-10#kf



its 8 direct 90amp phases instead of ASUS 4 teamed 50amp set up ???



specially with 5950x!!!

Thanks for the advice, how much of an issue are the power phases going to be when compared?

The two deal breakers for me are lack of USB C Front Header and Realtek LAN.

I will be using a NZXT H1 and the lack of USB C for the front is criminal in 2020, I also much prefer the Intel LAN offered in the Asus board too.
 
I know it has been ages since the first post, but I have finally finished the office/study.

The spec ended up as follows:

Laptops:

Dell XPS 13
HP Probook 640 G4

Monitors:

LG 38" @ 144hz - 38WN95C-W - Left
Dell 49" @ 60hz - U4919DW - Right

PC:

NZXT H1
AMD Ryzen 9 5900x
ASUS ROG Strix B550-I Gaming Mini ITX
Crucial Ballistix 64GB 3600mhz (2x32GB)
Samsung 980 Pro 2TB
Samsung 970 Evo Plus 2TB
Asus 3090 TUF 24GB
Logitech G915 Lightspeed Tactile Mechanical Keyboard x2
Logitech G Pro Wireless x 2

Chairs:

NeueChair Obsidian

Had to add strength and better stud positions to the wall to ensure the monitors could be wall mounted.

ACtC-3feCIAGv8VUtasBuJpeahAv8nCIleoTGYL3NwDaJKXciwR5bJ8fnPFaqbRIazM5qWVLUedaQjnWd2Eiz6ybxEKKRj0mI16a9pREhIIgnlQXUiXU6SNCq3Jnjfmp44a9vjILGsZg41P2_fTXKRhJc-0_=w1716-h1287-no


Last coat of plaster on and holes drilled for cables to pass through.

ACtC-3fBXvlYxmeDO8gs0sqEbz-HjwAt8uQl84dnp-oWDmwottAJcDO8ouY2WJ3jBKlYniGLtQsRIF9oWS5Sf4LDwRA02A3ZLHgJqCcOo3xk70IZYngg8binZoSxEzCL0XiwfLte9YlLCdGDpkhx5u5pHa3U=w1714-h1285-no


Wall painted and view from under the desk where the cables exit.

ACtC-3crPWc_GJvtrNTRclAV2Zr62wN0CXoV6my1QNgtODR74IBSsRX8j1B8Iac0Sn7jzgDngEzU9baOU23TtI_4hVSo8uDBfjtfwZ8YBg6syBC_8i2kZAPFpUoVeCyhWIDQuW375MazKmT5zigqwrvaRy4s=w1714-h1285-no


The cable tidy solutions I decided to go with, very easy to install and comes with the hole saw as well, keep everything in the same channel in the wall and very easy to add extra cables. I sprayed the lower one grey to match the colour of the cable tidy area under the desk.

ACtC-3cCCW5_Gh6CSq--eGPXXZOq91P37cbznZjqQfMjDClAMzTcgDO4lYZLk3QJ6CMV9qZUT0ewrJQNpzET2Ys2ken9Js9MdjcirZmPTRKYKRMuomvg3bhswv1ESFtT-IbNWLCgi2YR8qLw7RwKNyWKIC0C=w964-h1285-no


ACtC-3cGlX4lT-1m4V5ms0LQMdlQdRg22EYLFCaEUiYLLiGdCul-2BRL8xpR3nRBG61qw-zwxTROZ0DFSQES2Jzm6aqeKhfBxhnna30c7eJTOlPbiS1plOJbMrpRQnogBhhY-96ILeEjOQHgQ4ckzQLvol2i=w1714-h1285-no


Final pictures of the setup. The NZXT H1 has the IO located at the base of the case so I drilled a 60mm hole in the desk and added a plastic passthrough so that all of the cables for both monitors, power, USB etc to pass though the desk and straight into the PC.

ACtC-3ctN6yRjZlVo8CBoDZMUUzFrE45UUArVMDxUa-3fFMkv1KCOMwO-AB-LqONFd54q9zlTr71viDD-wv_YgE5hYz4znlShulADkNtwRheeplQpisMploiMNpB9UXcTDKSg_xWK2BHiXlcshZsPSvCXKM2=w1714-h1285-no


ACtC-3f-YMVi2orXQSuiO9WWHxNk9s3zeZlMEpbP66gXwD6662wNngzDZdV9JuvAYtW4TGf9l3V-2IKymGsTKOSDICX2fpB-4rrPlg2X-s1q2LLw7rE1rI6uvFtNCegqrRPkcPx5ots9KDtV7BGaZk8C2DbE=w1714-h1285-no


ACtC-3eDwqbwYb_G3yaPmO3ggG-NPKhBSeOqimV0flYk64rAodbPQUsXyvnm0mv9ivPoS8h3oVUlfA-lSaUHt_tW0PxiDWIWGztRQo74m-9eSl5o9HHHYnDRh8BVpw96nB8tInUePS_lMEfUGfKYJgny-6LM=w1714-h1285-no


ACtC-3dapfeLDhFGOOb7tswUaykABz5BqruUlnRIaHfP9h5Skxwx4sic2Zz6ajlG9L40xVeCnRqmVLynInktyN_0FI4vf-f4ETszAejRgZzp65YyYYdMHzcq9cr0FlAdaQW8xN4mK9syB4eY1ggVbUCIr2tB=w964-h1285-no
 
Last edited:
Thanks, still want to add a bit of colour/art or something to liven the room and may get some LED strip lighting for under the desk and on the back of the monitors.

I decided to do an ITX this time round (last case was a Corsair 750D), I love the idea of having a small case jam packed with performance.

When I first saw the H1 I absolutely loved it. I know they have been in a bit of trouble with their riser cable but they have been great with me, I got a nylon set of screws very quickly and received my new revised riser around a month ago.

In terms of IO location it ended up being another tick in a long list of things this case does right.

The temps have been very good and I am getting low to mid 70’s on full load in both CPU and GPU.

Things I’d change or nice to haves, 750W PSU and a PCIE 4.0 riser.
 
why the **** would you join up just to post that nonsense......you getting ready for the good ole second post 'just spotted this coworking space you should have looked at' link and run??

Haha, a very strange post thats for sure!

Not a massive change but I just upgraded to the Crucial Ballistix 64gb kit (2 x 32gb) from the 32GB kit, I am a business analyst and have had a couple of models hit 32GB so figured I would add some more.
 
Ver nice and clean setup, bet it's nice chilling in there working on stuff, wish I had that space lol

Thanks, yeah it is so good to be honest.

Been a member of these forums for over 18 years (I was a kid then) and I always marvelled at the setups that people have had over the years. Feel very lucky to now have the tech I have always lusted over.
 
Haha fine.

I have travelled a fair amount of the country including the large rainforest sand islands (Fraser & Moreton)

Never seen a croc other than at the zoo, I live on the coast in the middle of the east coast, they are all up the top 1200+ miles away.

Rarely see a spider, probably saw just as many in England to be honest. Never seen a Redback or Funnel Web, Huntsman’s are more common however they can't bite, they are fast as hell though so can make you jump. We have our house sprayed every year which kills any insects/pests that cross any of the thresholds or edges of the house.

Seen a fair few snakes, although never in a residential area that isn’t on acreage, Browns and Red Bellies are the ones to be careful of, particularly Browns as they are pretty aggressive and can do some serious damage.

To be honest, the "dangerous creature" thing is blown a little out of proportion, its nowhere near what people make it out to be. If you really go looking for them you will find them but for 99.9999% of your life you will never see anything. Magpies in swooping season, now that is a different story lol!
 
Just shows you what social media can do and years of talk about something until someone debunks it.

Haha so true, the "meanwhile in Australia" ones always make me laugh.

I guess another way of looking at it is that most people wouldnt associate America with dangrous animals in the same way they would Australia.

Yet they have Bears, Sharks, Black Widows and Recluse Spiders, Rattlesnakes, Cottonmouth, Copperhead and Coral Snakes. I am sure not a common sighting, but there if you go looking in the right places.

Australia is an amazing country and the quality of life is on another level (in my view). I have completely fallen in love with it, there are things I miss but that list is small I am afraid to say.
 
Sorry for the thread revival but for some reason I never saw the picture when you originally posted.

Love the setup, been thing of getting some Alex drawers for mine to put in the centre of the desk, looks great.
 
Last edited:
Does the one PC run both those huge monitors/setup OP?

Yeah so the PC in the centre (in signature) has display port cables running to each monitor. My wife works on the left one and I work on the right one, I am Business/Data analyst and deal with big data so need the real estate when working. I game on the left hand monitor as it has really good response times and refresh rates, along with G Sync etc.

Both monitors are also Thunderbolt/USB C so also run work and personal laptops as well. Keyboard and Mice then plug into each monitor so they work on a KVM with whichever device is using the monitor.
 
Back
Top Bottom