dse overclocking voltages

BennyC

BennyC

BennyC

Soldato
Joined
25 Sep 2006
Posts
14,432
ds3 overclocking voltages

set up as is follows...

akasa eclipse 62 120mm front and rear
ds3
e6300
corsair xms2 6400 cas 4.

Ive followed a few guides on here. i turned off cie, tm2 and eist.
and my voltages so far stand at cpu core 1.47
ram +0.3(2.1)
mch +0.2
fsb +0.3

and all this to get it stable at 2.3 is there something im missing?

are these safe voltages.
cpu temp is around 43-44 degrees.

thanks in advance

Benny.
 
Last edited:
Benny06 said:
set up as is follows...

akasa eclipse 62 120mm front and rear
ds3
e6300
corsair xms2 6400 cas 4.

Ive followed a few guides on here. i turned off cie, tm2 and eist.
and my voltages so far stand at cpu core 1.47
ram +0.3(2.1)
mch +0.2
fsb +0.3

and all this to get it stable at 2.3 is there something im missing?

are these safe voltages.
cpu temp is around 43-44 degrees.

thanks in advance

Benny.
Click to expand...


What power supply do you have?

Does it really need +0.3 on fsb and +0.2 on mch? Generally +0.1 on each is enough.
What ram settings have you set in bios and what bios version?

Screenie of your bios screen would help.

Steevo

edit

Have a good read of the DS3 owners thread in the mobo section of the forum mate. ;)
 
its a 480watt hyper, my ram is corsair xms2 at stock (800mhz)multiplier lowered when ocin as neccesary, part from ive upped voltage to 0.3 to comply with its 2.1 needs. bios atm is f6
 
u rekon its my psu? sometimes after i change bios settings up to oc, it tries to boot, i get like a long beep, which i think means power error, or i get the beeps which say power error or sumthing... but then it boots after that.
 
You must log in or register to reply here.
Back
Top Bottom