Dual Monitor Resolution issue.

[evohicks]

I have 2 x HIS 7970 cards but they only have 1 x D-Dvi output, 1 x HDMi output and 2 x MDP outputs.
So I want my 2 monitors to output 144hz and 120 hz respectively, I am assuming I need an active MDP adapter....
http://www.overclockers.co.uk/showproduct.php?prodid=GX-000-SR&groupid=1929&catid=1757
Is there any other way to do this, I know these have come down in price but still 50 sheets (BTW OCUK are by far the cheapest I've seen)

 

[Stas823]

you shouldnt need an adapter i have a 144hz and a 120hz hooked up via two dvi's.

 

[evohicks]

That's just it though, I only have 1 x Dual DVi output on my card, can only connect the top card in my Xfire setup.Would it be possible to say use one of these to share the Dual DVi so that I can connect both monitors to it.....
http://www.overclockers.co.uk/showproduct.php?prodid=CB-065-OK&groupid=1929&catid=1754

 

[Surveyor]

The BenQ has a DP input so all you need is a miniDP to DP cable.

 

[evohicks]

The BenQ has a DP input so all you'd need is a miniDP to DP cable.

Thanks, just what I was hoping
I should have checked this.

 

[evohicks]

So in theory, if I added another 120/144hz monitor with DP, it would work from my remaining DP in my card without the need for extra power?

 

[evohicks]

Does anyone know if I need an active display port adapter to run my 3 screens over 60hz?
I have 1 monitor via D-DVD and the other 2 connected to display ports.
When I plug in the first 2 monitors they are fine @120/144hz but when I plug the third in it drops to 60hz, doesn't matter which way I plug them in.
OK it's sorted with a new driver from AMD.