Associate
- Joined
- 4 Feb 2006
- Posts
- 544
- Location
- nottingham
just a quick question today I was moving my system around and in advertadly removed the DVI connection to my TFT. After connecting it back there was no display just remained on standby.
The DVi cable works fine, BUT when I restart the machine the display comes back, and if I remove the cable in the bios and insert it, it will come back on, however after post, you have to restart if the dvi cable is disconnected.
The second port seems to have the same behavour so i do not believe there is any problems. The card is the Powercolor 256MB 1950 PCi-e.
My Nvidia card will detect the cable if windows is posted or not, so I just found this alittle odd? Does anyone elses behave this way.
Just want to make sure there is no fault with my card.
The DVi cable works fine, BUT when I restart the machine the display comes back, and if I remove the cable in the bios and insert it, it will come back on, however after post, you have to restart if the dvi cable is disconnected.
The second port seems to have the same behavour so i do not believe there is any problems. The card is the Powercolor 256MB 1950 PCi-e.
My Nvidia card will detect the cable if windows is posted or not, so I just found this alittle odd? Does anyone elses behave this way.
Just want to make sure there is no fault with my card.
