this cpu can goto 3.12ghz (100x oc) my specs are Asus p5e vm hdmi,e2140 4,50w psu, 8gb ddr2 800mhz... trying to get to 3.0ghz from 1.6... black screen overclocking failed after certain fsb limit is reached, bios settings i can change,,,
cpu ratio setting [auto,][8.0max]
fsb strap to north bridge [auto] 200mhz,266,333 max
fsb frequency [333]max i could go before black screen (max is 800 in settings)
pcie frequency [auto] (100 to near 200)
dram frequency [auto] 533,667,800mhz max
dram timing control [loads of settings] my ram sticker has 5-5-5-18
clock over charging mode [auto] (0.70,0.80,0.90,1.00v)
cpe spread sprectrum [auto]
pcie spread sopectrum [auto]
Cpu voltage [auto] min reccomended for this cpu is (0.85-to max 1.5v)
cpu voltage reference [auto]
cpu voltage dampner [auto]
pll voltage [auto]
dram voltage[auto] my ram sticker says 1.9v
fsb termination voltage [ auto] north bridge voltage [auto] north bridge voltage reference [auto]
help with settings to change these to for fastest possible stable overclock?
or any software apart from XTU for overclocking.
cpu ratio setting [auto,][8.0max]
fsb strap to north bridge [auto] 200mhz,266,333 max
fsb frequency [333]max i could go before black screen (max is 800 in settings)
pcie frequency [auto] (100 to near 200)
dram frequency [auto] 533,667,800mhz max
dram timing control [loads of settings] my ram sticker has 5-5-5-18
clock over charging mode [auto] (0.70,0.80,0.90,1.00v)
cpe spread sprectrum [auto]
pcie spread sopectrum [auto]
Cpu voltage [auto] min reccomended for this cpu is (0.85-to max 1.5v)
cpu voltage reference [auto]
cpu voltage dampner [auto]
pll voltage [auto]
dram voltage[auto] my ram sticker says 1.9v
fsb termination voltage [ auto] north bridge voltage [auto] north bridge voltage reference [auto]
help with settings to change these to for fastest possible stable overclock?
or any software apart from XTU for overclocking.