E2180, IP35 O/C settings (2.8 max?)

[ssmacc]

Hello,

Can some please advice me on O/C an E2180. I hve the following components:

E2180
IP35
4GB Geil Ram

Undere the BIOS I have got a stable 2.8 MHz with the following settings:

CPU Operating Speed
External Clock 280 MHz
Multiplier Factor 10 x
Estimated Clock Speed
DRAM Speed (CPURAM) 1:1.25 (DDR2-700)
PCI Express Frequency 100 MHz

Voltages
CPU Core Voltage 1.3850v
DDR Voltage 2.10v
CPU VTT Voltage 1.2000v
ICH 1.50v Voltage 1.50v
MCH 1.25v Voltage 1.290v
CPU GTLREF 63.0%

However, if I attempt any higher I the BSOD! I have actually booted at 3.4MHz (although it only ran Orthas stable for 15 seconds), with a couple of tweaks to the voltages. All attempts I’ve tried at 3GHz & 3.2GHz have not booted? Could anyone please advice me on the setting above or have a just got a not very O/C processor?

I’d be happy with 3 GHz as I bought the processor as a stopgap.

Cheers

 

[CyZMyAssBaby]

Have a read of this thread it may provide you with some tips and advice all though it is the pro thread it will still be relevant to your mother board and Bios (IP35)

**Official ABIT IP-35 Pro Review/Overclock/Guide Thread**

http://forums.overclockers.co.uk/showthread.php?t=17739133

You can also post for help in that thread. You will the get the help and info you need.

 

[lopkinfop]

have you tryed with just 2 sticks of ram, i have that exact config but with 2 sticks and am at 3.5GHz at the moment 10 hours orthos stable, had it stable for 3 hours orthos at 3.6

also try upping the vtt voltage to 1.225 (i think thats the value there are only 2 options)

my values are
cpu volts - 1.38
ddr volts - 2.1
vtt - 1.225
ich 1.5 - 1.5
mch 1.25 - 1.25

350x10 FSB
5:6 FSB-RAM - 840

 

[ssmacc]

thanks i'll give that a go when i get home (Voltage that is) I'll stick with the 4 GB of RAM at the mo. what Temps have you got with 3.5? and what cooler are you using?

Cheers

 

[lopkinfop]

tunic tower at 25-30 idle and 45-55 (depending on room temp) at full orthos load