E2200 questions

[alastair84]

Hi what is the default stock voltage on the E2200 chip? i.e. the voltage that it should use if you run it at 2200mhz?
I ask this because the voltage is just set to auto on my mobo when i had it at stock and CPUZ reports it as 1.3v....is this correct?

However, I did dabble in some overclocking today. I currently have mine set to 1.4v in the BIOS and CPUZ reports it as 1.376v
Speedfan detects the core temp @ 40oC

I'm running at 275 x 11 = 3025 ish

I'm using a an ASUS p5kr and this ram : OCZ 2GB (2x1GB) PC2-6400C4 Dual Channel Platinum Revision 2 XTC Series DDR2 (OCZ2P800R22GK) (Deal Product).
Is this current overclock @ FSB = 275 ok? i haven't primed anything just done SUPERPI 1mb so far.

Also the CPUZ reports on the SPD on my ram that the 400mhz settings should be 5-5-5-15. However i bought the RAM on the assumption that it would do 400mhz @ 4-4-4-15? or do i have to manually set these settings in the BIOS and also the memory voltage? (the voltage is currently 1.8v)
thanks

 

[mattyrigby00]

depends on the chip, mine has a default of 1.325

 

[alastair84]

ok so i ran orthos and it failed straight after that paging thing within 25s.
upped the CPU volt to 1.425 in the BIOS and CPU showing its 1.36v now. a little bit strange as when the BIOS cpu volts was at 1.4v CPUZ showed it as 1.36 too. lol.
anyways i'm running orthos now 11 minutes in and no errors so far. Speenfan shows my cores to be 54oC.
Am i running safe temperatures and volts people? can i go further?

 

[PhillyDee]

That depends on you. I would not run full load temps at anything over 65 Degrees, also depends on the stock cooler. Generally, the higher the volts, the higher the temps.