e4300 problem ?

[Mark403]

Does this image look right to you ??

is the core speed not supposed to be 1800mhz ?

 

[easyrider]

Does this image look right to you ??



is the core speed not supposed to be 1800mhz ?

disable speed step in the bios

 

[Mark403]

speed step is already turned off.

 

[Justintime]

Ahh i see you got the special 1400MHz ULV Version.., did'nt you know the difference?











kidding, disable EIST, TM2 & C1E

 

[Mark403]

i disabled C1E, only option I could find, but also the multiplyer is only at 7, ive incresed to 9 now so i got 1800mhz.

Seeing as I raised the multiplyer to 9, would I have to adjust the voltage at all ?

 

[Justintime]

No, 1.8Ghz is the stock speed, so stock volts will be fine, prolly even a bit less if you're inclined to undervolt

 

[mattpj]

your multiplier is at 7x, is it set to 9x on your bios. Also, the steps above should work.

 

[Mark403]

yeh its at 9 now.

whilst im here, which temp should I go by ??
These temps are when im not doing anything in the background btw.

 

[Big.Wayne]

which temp should I go by ??

TAT 44°C/43°C

You should change your FSB from 200MHz to 334MHz (if your memory can run that fast?).