e6600 clocks

danielmayne · 23 May 2007 at 18:58

any 1 got 1 of the following batches and do they overclock well and do they need a lot of voltage ?

FPO L652B112
Product code BX80557e6600SL9ZL

danielmayne · 26 May 2007 at 22:16

any 1 ?

Justintime · 26 May 2007 at 22:37

Had one L652B that did 3Ghz on stock volts, though it needed 1.41V for 3.2 and 1.525v for 3.4Ghz, also ran very hot, did'nt even bother carrying it over that. Mileage may vary though.

danielmayne · 27 May 2007 at 11:00

well ive overclocked it to 3.2 13 hours orthos stable stock volts well 1.35 because my mobo has no lower but i would like to know why orthos picks it up as 3.6 and windows picks it up as 3.6 but cpu-z picks it up as the right speed and also do u think these temps are ok i have a scythe ninja and the temps are around core 0 44c and core 1 42c under load

SooTyLaD · 27 May 2007 at 13:42

danielmayne said:
well ive overclocked it to 3.2 13 hours orthos stable stock volts well 1.35 because my mobo has no lower but i would like to know why orthos picks it up as 3.6 and windows picks it up as 3.6 but cpu-z picks it up as the right speed and also do u think these temps are ok i have a scythe ninja and the temps are around core 0 44c and core 1 42c under load

your temps are excellent and the discrepancy is due to the fact that windows does not acknowledge the multiplier change from 9 to 8

danielmayne · 27 May 2007 at 19:17

ok but you sure my temps are good for 1.35 volts you not think they should be less

Slinky1989 · 27 May 2007 at 19:21

danielmayne said:
ok but you sure my temps are good for 1.35 volts you not think they should be less

42 degrees load is good even for stock volts.

You should be happy! (and amazed).

Mine hits 55 degrees load at 3.4 with 1.45vcore.

At stock it was about 45-48 load.

danielmayne · 27 May 2007 at 19:24

ok so their fine do you think if a new bios comes out for my mobo and i can set the voltage to 1.325 volts will the temps drop by much

V|per · 27 May 2007 at 23:01

a degree or 2 maybe, dunno why you're worried though, you're temps are the best temps i've seen with a C2D...

JoyPadJedi · 28 May 2007 at 11:35

justinwilkin said:
42 degrees load is good even for stock volts.

You should be happy! (and amazed).

Mine hits 55 degrees load at 3.4 with 1.45vcore.

At stock it was about 45-48 load.

^^

danielmayne · 28 May 2007 at 12:55

ok thanks for your help