e6600 Settings wont boot?...

spartanpete · 21 Sep 2007 at 19:19

Hi

about 6 months ago my e6600 was seup at 3 Ghz and ran no issues.
Howerver now when i try it it wont come up?

settings i am trying are...

SPP -MCP 332 (no 333 option)
vcore 1.4
mem 2.1

linked mem 3:2 ratio, fsb qdr 1066.

bios is 1205 on asus p5n32

memory is 1000mhz OcZ

thanks for any help
.

Cob · 21 Sep 2007 at 19:23

Will it boot at stock speeds or after you've cleared the CMOS?

spartanpete · 21 Sep 2007 at 21:17

hi

yes i can get it back by reset, but i can not find settings to get it OC and start?

Cob · 21 Sep 2007 at 21:24

Are you able to leave the CPU on stock and set your memory to 1066mhz?

If so, download and burn the Memtest86+ ISO and boot from it and let it run to see if it picks up any errors.

spartanpete · 21 Sep 2007 at 22:50

hi cob, sorry what would the bios settings be for this memory then to run at 1066?

sorry a little new to overclocking

also i have tried just the cpu on 332 fsb at 1.35 and 1.4 volt and it wont start?

spartanpete · 22 Sep 2007 at 11:39

ok even weirder now, the pc will boot if all i chang4e from defualt is the system clocks screen to 300, but its still reported as 2.4 and 266 in cpu z?!
But back in bios still reads 300 !?