E6750 OC

Joop · 26 Jul 2007 at 23:02

PC
DDR2 GeIL 800 MHz Ultra Low 4-4-4-12 Running 2.1V
GA-P35-DQ6
Intel C2D E6750 Running 1.4V
Syphe Infinity CPU Cooler

Well i Got a OC of 3.4GHz x8 Multiplier 425MHz FSB
RAM is 1:1 4-4-4-12 850MHz

SpeedFan 25-26C Idle
38-40C Load
CoreTemp 25-26C Idle
38-40C Load
Intel TAT 30-32C idle
48-50 Load

First what program to believe?
Now if i put the FSB to 435MHz in Orthas my RAM after 4 seconds has 1 Error i tryed to losen the timing to 5-5-5-15 and 18 but still get the Error, any one got any ideas what to do??

Do you think is is a good OC for the Temps!!

Barry1337 · 27 Jul 2007 at 00:15

Intel TAT!!

V|per · 29 Jul 2007 at 15:50

Depends on the load temps... so far it's not a bad clock at all. may want to run the ram at stock speeds then run orthos to make sure it's not your ram that's giving the fail, also might want to try memtest to see if it's borked or not. If it turns out that your ram is fine, and it really is giving up in orthos, then bump the voltage a little..

sulli · 29 Jul 2007 at 16:17

None of these programs currently give the correct temp info for these new go stepping cpu's. you should add 10c-15c on which should be closer to actual.