E8600 E0 owners, post your Vcore

Dicehunter · 23 Jan 2009 at 21:38

Just curious what everyone needs to sustain a good overclock, got mine at 1.35v at the minute.

gurusan · 23 Jan 2009 at 22:04

1.35v for 4ghz? No offense but you are doing something wrong. Post up your bios settings`

porta · 23 Jan 2009 at 22:07

4ghz @ 1.136v in windows, the vid of chip is 1.1875v

RJC · 23 Jan 2009 at 22:09

1.31V @ 4.4GHZ

1.1875 VID according to Core Temp.

gurusan · 23 Jan 2009 at 22:12

E8500s allowed?

oggiet · 23 Jan 2009 at 22:13

1.264V @ 4.0ghz...all did was change FSB to 400

Dicehunter · 23 Jan 2009 at 22:15

gurusan said:
1.35v for 4ghz? No offense but you are doing something wrong. Post up your bios settings`

Was meant to put a 1 infront of the 5, its 1.135 typo for the win

at least i think it is, will check laters.

gurusan · 23 Jan 2009 at 22:16

ah good stuff. well done

Dicehunter · 23 Jan 2009 at 22:19

nice clock by the way gurusan, very nice indeed.

oggiet · 23 Jan 2009 at 22:19

gurusan said:
E8500s allowed?

Nice OC, watercooling ??

gurusan · 23 Jan 2009 at 22:20

yup thanks, this one's a keeper. Runs as hot as the sun though :/ Under water 46c idle 72C during prime.

Stays about 55-60 when gaming though so that's ok. Derned low-vid chips

Dicehunter · 23 Jan 2009 at 22:22

gurusan said:
yup thanks, this one's a keeper. Runs as hot as the sun though :/ Under water 46c idle 72C during prime.

Stays about 55-60 when gaming though so that's ok. Derned low-vid chips

you have to post some pics of your seup pretty pleeeeeaaasssse

oggiet · 23 Jan 2009 at 22:22

Nice, you got cpu + gpu in same loop ??

Bradley8988 · 23 Jan 2009 at 22:32

1.402V underload but not 100% stable yet. Gaming maxes out at 41c but idles around 31c underwater.

gurusan · 23 Jan 2009 at 22:32

my setup is way ghetto. I'm more of a function over form person......going to be mounting my pump in the case properly once I fab up a mount from some spare plexi.....and cutting my side panel so it actually fits on with the 120mm rad on the back there. Got a GTX 280 coming as well so will need to figure out a way to WC it on the cheap, don't want to shell out for a full cover

oggiet · 23 Jan 2009 at 22:37

Love that $ note

Also is that headphones amp ???

Bradley8988 · 23 Jan 2009 at 22:39

Proper Ghetto dude but it works well so cant knock it.

gurusan · 23 Jan 2009 at 22:40

yeah grandma in San Diego sent that awhile ago and it's been hanging around til the exchange rate gets a bit better.

And yeah that's a "Starving Student Millet Hybrid Headphone Amplifier" built by me

Sounds great and was fun to build...except I zapped myself with 48V, that wasn't so pleasant.

Bradley8988 said:
Proper Ghetto dude but it works well so cant knock it.

Yeah looking at some setups on here and cpc I get a bit embarrassed and always get a bit inspired to make it look pretty....but never can do it...I suck at the artistic part of wc-ing. I was going to do the radbox but it required so much money and time I could not go through with it.

Bradley8988 · 23 Jan 2009 at 22:46

You stopped making it? Well since i got back underwater and been talking with you i have the urge all the time to push it harder and keep testing. I still cant for the life of me get it stable and get blue screened running burntest.

Blackwhite · 23 Jan 2009 at 23:06

Mine is quite bad chip 4 GHz - 1.264v - can't go lower