EIGRP Configuration Advice Please

[Curiosityx]

Greetings, im in the process of configuring several client sites to use EIGRP now that we have moved there current infrastructure over to purely Cisco.

Could you advise me whether the diagram below would be the best course of action, I have stripped it down somewhat and simplified the addressing but it gives the basic outline.

Now what im thinking it to just advertise the 10.140.0.0 and 192.168.0.0 networks from the main site using auto-summary, then too advertise the 192.168.100.0/110.0 and 120.0 from the remote sites.

Would this work or should i configure both the 10.140.0.0 and 192.168.0.0 networks on every router within the same AS?

Any comments would be appreciated.

Cheers

 

[Curiosityx]

Cheers, yes it is a very simple example, but you have given me what i needed to know.

 

[Curiosityx]

Exactly how much subnets? Seems a waste to be using a routing protocol if a few (floating)static routes would suffice?

There will be 58 sites in total, some will also be linked to sites within the same geographic area, im trying not to run all the routing through the central office, have some redundancy, id also like to dynamically select the best link between sites and have very fast convergence should a link go down, EIGRP imo is the way to go.