** EK GTX 680 Waterblocks NOW IN STOCK **

[rjk]

Hi Guys

We have placed our order for GTX 680 waterblocks today, stock should be here next week.

Please ensure that you place a pre order to avoid disappointment. at the rate the 680s are selling and considering the emails that I have had about them today, I would suggest getting in quick before our allocation is depleted.

Pictures will be updated as soon as EK release some proper ones





EK-FC680 GTX Full Cover Waterblock - Nickel Plexi **EN Nickel Plating** @ £79.99 inc VAT

EK-FC680 GTX is a high performance full-cover water block for nVidia reference design GeForce GTX 680 & -670 series graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list!

This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC680 GTX water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps.

Base is made of electroless nickel (EN) plated electrolytic copper while the top is made of quality cast acrylic material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws.

EKWB recommends the purchase of aesthetic retention backplate (EK-FC680 GTX Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section.

G1/4" threaded fittings can be used on both side of the water block (on copper and plastic) and 2 plugs (EK-Plug G1/4) are enclosed!

Up to four EK-FC680 GTX series water block can be interconnected with EK-FC Bridge & Link system. The correct connection link for this water block is EK-FC Link GeForce.

Enclosed:
- EK-FC680 GTX series water block
- mounting mechanism with screw-in brass standoffs
- thermal pads

Please note: Thermal paste is not included and needs to be purchased separately. EKWB recommends Gelid GC-Extreme for best performance.

Made in Slovenia - Europe!

Only £79.99 inc VAT.

ORDER NOW





EK-FC680 GTX Full Cover Waterblock - Nickel Acetal **EN Nickel Plating** @ £79.99 inc VAT

EK-FC680 GTX is a high performance full-cover water block for nVidia reference design GeForce GTX 680 & -670 series graphics cards. Please check our Cooling Configurator online compatibility system for detailed compatibility list!

This water block directly cools the GPU, RAM as well as VRM (voltage regulation module) as water flows directly over these critical areas thus allowing the graphics card and it's VRM to remain stable under high overclocks. EK-FC680 GTX water block also features a very high flow design therefore it can be easily used in liquid cooling systems using weaker water pumps.

Base is made of electroless nickel (EN) plated electrolytic copper while the top is made of quality POM Acetal material. The sealing is performed by quality rubber washers. Screw-in brass standoffs are pre-installed and allow for safe, painless installation procedure. Block is mounted with enclosed M3x4 DIN7985 screws.

EKWB recommends the purchase of aesthetic retention backplate (EK-FC680 GTX Backplate - Black) which improves the looks of your graphics cards and also provide some passive cooling to the VRM section.

G1/4" threaded fittings can be used on both side of the water block (on copper and plastic) and 2 plugs (EK-Plug G1/4) are enclosed!

Up to four EK-FC680 GTX series water block can be interconnected with EK-FC Bridge & Link system. The correct connection link for this water block is EK-FC Link GeForce.

Enclosed:
- EK-FC680 GTX series water block
- mounting mechanism with screw-in brass standoffs
- thermal pads

Please note: Thermal paste is not included and needs to be purchased separately. EKWB recommends Gelid GC-Extreme for best performance.

Made in Slovenia - Europe!

Only £79.99 inc VAT.

ORDER NOW

 

[rjk]

then you will have to place a pre order

 

[rjk]

we have ordered 40 of each

you will get a personal phone call from myself if we cant ship it.

we have sold 10 of each so you will be assured one if you order as you would be fairly low down in the queue.

 

[rjk]

Shame

 

[rjk]

nope

we have plenty of each left to assign

they shipped from slovenia the other day so should be at OcUK any day now

 

[rjk]

excellent, look back here for any updates. will try to keep you all informed

 

[rjk]

I've had an email from the place i've ordered with saying they are going to be delayed until around 4th April now.

You could always cancel your order and order from a retailer who has stock

 

[rjk]

we do not stock non nickel plated EK blocks.

the aquacomputer block will be in stock soon.

 

[rjk]

thanks my 2 came today,

How about stocking the bridge blocks?

they are on the way.

 

[rjk]

Tested 4 of these blocks today in quad SLI
All I can say is that I am mega impressed. I have had loads of EK blocks in the past but the new mounting methods are superb, now easily on par with the competition.

Also the copper is machined a lot more making certain areas of the blocks much thinner than previous blocks.

The good thing about having a thinner copper base is that heat gets into the coolant quicker, this in turn keeps the whole card running cooler.

I am mega impressed with these blocks, the current high end blocks from EK for the 7970 and 680 cards are superb performers.

 

[rjk]

the quad sli is under wraps as it will be unveiled soon

that mayhems sunset yellow looks better every time I see it

 

[rjk]

ah sweet! now that you mention it I can see it over the fittings

looks really good though. very tidy system you have khemist

 

[rjk]

I think next up is pink

suits you sir

do you have a build log on the forums?