ek predator

MofoKilla · 24 Sep 2015 at 23:19

hello guys i bought i ed predator 240 from ocuk , can anyone plz tell me if it will fit inside a corsair obsidian 450?

i asked at ocuk but they were unsure?

thanks.

johnnyrotten665 · 25 Sep 2015 at 12:10

their are 240 mounts at the front, top and bottom in the 450d so I'd go with yes.

mods1965 · 25 Sep 2015 at 12:45

Measure your clearance at front and top of the case to account for the Predator 240 which is 295 mm in length and 68 mm thick. Full dimensions on EKWB site.
Remember that unlike most 240 AIO, the Predator has the pump and reservoir on the end and you have to take that into account as well. You may well find that the pump/res may extend into drive bay bracket.

iiNNeX · 23 Oct 2015 at 00:22

MofoKilla said:
hello guys i bought i ed predator 240 from ocuk , can anyone plz tell me if it will fit inside a corsair obsidian 450?

i asked at ocuk but they were unsure?

thanks.

Yes easily, as the 450D has space for a 360mm at the top. I have the same case and am buying the same cooler next week

Ash0787 · 24 Oct 2015 at 08:31

It will fit at the front but possibly not at the top as there is only clearance for a
40mm radiator + 25mm fan ( mine was hitting the motherboard ), I ended up switching to a cheap 30mm radiator for the top with that case

A thick high fpi 280mm radiator at the front works well with the 450D, however availability of good 140mm fans is a problem, I was using noctua industrial ppc which were very loud at high rpm.

Predator is nice though I would recommend it

r7slayer · 24 Oct 2015 at 12:13

Make sure the end where the pump and rad and where the tubes connect to the radiator is at the end of the case where your optical drives go. So there is clearance and room. No sure mounting it the other way round where its next to the rear exhaust will fit so easily. If you get where im comming from?