Enermax Revolution 85+ 1050Watt PSU

[RedGooner]

I have an Enermax Revolution 85+ 1050Watt PSU.

Connected to Asus Rampage III Black Edition Intel X58 PCI-Express DDR3 Motherboard.

The other day, I noticed a loose fan lead on my Mobo, I plugged it back in, and BANG, yes I know turn off PC first. Yes a stupid moment.
PC stayed working was surprised but noticed one of my fans no spinning. But there was a burnt smell for a few seconds, and that went away.

Then yesterday I traced the loose fan lead, and it went to my PSU, and its there to monitor the speed of the PSU fan. I am just wondering what damage I have done, at the moment all is working ok.

 

[RedGooner]

All is working under full load.


Hardware Monitoring : Winbond W83677HG-I
Processor Voltage : 1.26 V
VIN1 : 1.74 V
+3.3V Voltage : 3.25 V
+5V Voltage : 4.87 V
+12V Voltage : 11.71 V
VIN5 : 2.04 V
VIN6 : 1.22 V
SYSTIN : 19 °C
CPUTIN : 19.5 °C
AUXTIN : 37.5 °C
CPUFANIN0 : 1623 rpm

Hardware Monitoring : Asus iROG 02
Processor Fan 3 : 782 rpm
Fan 3 : 685 rpm

Hardware Monitoring : Asus ATK0110
V3VV : 3.25 V
V5VV : 4.78 V
VV12 : 10.66 V
ECV1 : 1.65 V
ECV0 : 1.25 V
ECV2 : 1.11 V
ECV3 : 1.51 V
ECV4 : 1.81 V
ECV5 : 1.81 V
ECV6 : 1.12 V
ECV7 : 1.26 V
CPUT : 38 °C
MBTP : 82.54 °C
ECF1 : 3250 rpm
ECF7 : 791 rpm
ECF0 : 1467 rpm
ECF4 : 690 rpm

Processor Intel Core i7 Extreme : Sensor DTS
Core 1 : 31 °C
Core 2 : 29 °C
Core 3 : 35 °C
Core 4 : 33 °C
Core 5 : 33 °C
Core 6 : 35 °C

NVIDIA GeForce GTX 980 : nVidia Driver
Temperature : 33 °C
Temperature (GPU) : 33 °C
Fan : 0%
Voltage : 0.875 V
:
NVIDIA GeForce GTX 980 : nVidia Driver
Temperature : 36 °C
Temperature (GPU) : 36 °C
Fan : 1470 rpm
Fan : 40%
Voltage : 0.875 V

Hard Disk Monitoring : S.M.A.R.T
Hard Disk WDC WD6000HLHX-01JJPV0 : 23 °C
Hard Disk OCZ-AGIL ITY3 : 30 °C
Hard Disk Samsung SSD 840 EVO 250G : 24 °C

 

[RedGooner]

Just in case, what's a good PSU to go for 1000W+