Enthoo Primo Question

Michaeljcox24 · 13 Mar 2014 at 08:05

Lads,

Posted a couple of q's in WC about this case which I was looking at purchasing for my Easter rig maintenance. This question goes out to anyone with w/c rads in the case.

I want to put an RX360 in the roof, which I am 100% certain will fit in a push config and wont be an issue.

However, if I put an EX240 in the base, will I loose the HD cages, or can you have all the HD cages in there as well as a 240mm rad.

Also, as I've never put a rad in the bottom of a rig before, do you have the fans sucking air up from underneath, or blowing down through the base.

Cheers.

Michaeljcox24 · 13 Mar 2014 at 09:32

Thanks dude

Michaeljcox24 · 13 Mar 2014 at 10:01

Any idea about the fan orientation?

Michaeljcox24 · 14 Mar 2014 at 18:52

Quite looking forward to this build. My first one was an epic fail but wasn't my fault, it was a problem with one of the blocks not making contact with the gpu on a 580. I must have stripped the loop down, bled it and filled it 25 times in a weekend to try different ideas.

With this one I have a 690 with a block that works. Should be fairly stress free.