Eyefinity Hardware - Quickie! :D

Associate
Joined
28 Jun 2012
Posts
29
Hey guys, just a quickie. Doing an Eyefinity setup for a friend, am I right in thinking the following is all the hardware I need?

3 monitors
PC with good graphics card (AMD 7850 2GB)
and one of these adapters?

CB-018-OK_27202_350.jpg


Then plug 2x DVI cables in, plus one into the HDMI port via the adapter and configure in CCC?

Cheers!!!!!
 
Last edited:
Also, the 7850 is an awesome value for money card aimed at gaming at 1920x1080 - not eyefinity setups where you most likely need to turn down the graphics settings quite a bit in any modern game.

So yes with the advice above you'll have an eyefinity setup, whether it gives a good experience will however depend on the games that will be played.
 
Also, the 7850 is an awesome value for money card aimed at gaming at 1920x1080 - not eyefinity setups where you most likely need to turn down the graphics settings quite a bit in any modern game.

So yes with the advice above you'll have an eyefinity setup, whether it gives a good experience will however depend on the games that will be played.

This is correct. Op you'll either have to go with crossfire or overclock the nuts off a 7970 to get decent performance at 5760x1080
 
To be honest I'd be surprised if you couldn't get acceptable gaming from eyefinity 5760x1080 on a highly clocked 7850 2GB.
I mean, eyefinity launched with the 5XXX series.

Obviously you won't be running max constantly.
 
To be honest I'd be surprised if you couldn't get acceptable gaming from eyefinity 5760x1080 on a highly clocked 7850 2GB.
I mean, eyefinity launched with the 5XXX series.

Obviously you won't be running max constantly.
Yeah I was shocked to hear that a 7850 would be totally incapable of playing on Eyefinity.

I might try and do Crossfire 7850s or a 7950 to be on the safe side though.
 
Back
Top Bottom