Fan Controller for Antec 902 v3

Corky20 · 31 Dec 2011 at 06:53

I'm looking to buy this fan controller here as it matches in well with the Antec 902 v3 case.: http://www.nzxt.com/new/products/fan_control/sentry_mix

The only reason i'm looking it is it can be a bit tedious to adjust the fans at the front and back all the time when switching between surfing the internet and gaming for example.

Does anyone know is it possible to connect all the Antec 902 v3 fans upto this including the big boy fan and how would I go about doing it? Also what kind of adaptor cable would I need to convert the molex fans?

Corky20 · 2 Jan 2012 at 15:53

Bump!

Can anyone confirm if the Fan Controller in the OP will work with all the fans in the Antec 902 v3?

DavidS14 · 3 Jan 2012 at 15:45

A quick look on Antec's site gives the power ratings for the case fans as:

200mm 0.3A/3.6W
120mm 0.24A/2.9W

The fan controller you've highlighted is quoted as being able to handle 50W per channel so it will easily handle the stock fans.

The controller uses 3 pin fan connectors so if your fans have molex you'll need something like a Molex to 3 pin convertor

The Antec manual states that the minimum voltage for the 120mm fans is 5V, doesn't have info on the 200mm that I can see, it also says that the on board controls need to be set to max if you use a seperate fan controller.

HTH

Corky20 · 5 Jan 2012 at 05:24

DavidS14 said:
A quick look on Antec's site gives the power ratings for the case fans as:

200mm 0.3A/3.6W
120mm 0.24A/2.9W

The fan controller you've highlighted is quoted as being able to handle 50W per channel so it will easily handle the stock fans.

The controller uses 3 pin fan connectors so if your fans have molex you'll need something like a Molex to 3 pin convertor

The Antec manual states that the minimum voltage for the 120mm fans is 5V, doesn't have info on the 200mm that I can see, it also says that the on board controls need to be set to max if you use a seperate fan controller.

HTH

Cheers for the reply, exactly what I needed to know!

Think i'll order the fan controller tomorrow and will need the molex convertors!