FC Terminal Dual Serial

vasilltino · 10 Mar 2015 at 10:19

Hey guys,

Longshot but does anyone know where i can find the rectangle/oval gaskets that fit this block. Bought one second hand and it didnt come with any..... tried normal O-Rings and i am either being stupid or they wont work ....... :confused:

Uncle Petey · 10 Mar 2015 at 11:28

You're meant to use the ones from your original block terminals.

vasilltino · 10 Mar 2015 at 11:50

Yeah kinda knew that ..... problem is i got it second hand and they aren't here ......

Uncle Petey · 10 Mar 2015 at 12:48

Your original FC blocks don't have orings on their terminals? The dual terminal block doesn't come with any, as you're supposed to use the ones that are already installed on the water blocks and place them on the bridge.

Contact EK and they'll provide you with some if that's the case.

Mads1 · 10 Mar 2015 at 14:56

On this subject can someone help me, ive just got a fc titan se block and its missing the 3 x screws and orings for the acetal terminal, i see they do a clear plexi terminal, does this come with the screws, i know it comes with the o-ring gaskets.

Disco_P · 10 Mar 2015 at 18:07

I don't think they do as they assume they come with the block. However contact EK directly and ask them for some and they should help you.

Mads1 · 10 Mar 2015 at 18:14

Disco_P said:
I don't think they do as they assume they come with the block. However contact EK directly and ask them for some and they should help you.

thanks ive just done that, trying to find EK luc in the forums aswell.

EK Luc · 10 Mar 2015 at 20:33

vasilltino said:
Hey guys,

Longshot but does anyone know where i can find the rectangle/oval gaskets that fit this block. Bought one second hand and it didnt come with any..... tried normal O-Rings and i am either being stupid or they wont work .......

vasilltino said:
Yeah kinda knew that ..... problem is i got it second hand and they aren't here ......

That's a bugger that the previous owner didn't provide the o-rings

The O-ring size you need is 15x1mm (NBR70) 15mm being the inside diameter of the o-ring.

If you can't find some in a hardware store, you will have to contact EK (http://www.ekwb.com/support/) since we don't have a replacement part section in the webshop.

Mads1 said:
On this subject can someone help me, ive just got a fc titan se block and its missing the 3 x screws and orings for the acetal terminal, i see they do a clear plexi terminal, does this come with the screws, i know it comes with the o-ring gaskets.

Mads1 said:
thanks ive just done that, trying to find EK luc in the forums aswell.

I'm here!!

Sorry i'm still a little bit delayed with the PAX East that ended on sunday.

Again I don't understand why the previous owner didn't provide the o-rings and the screws

The O-ring size you need is 15x1mm (NBR70) 15mm being the inside diameter of the o-ring and the screws are M4x28 DIN7984.

Our multiple GPU bridges don't come with the screws and o-rings since you're suppose to use the ones you already have. We only give one screw and one o-ring just in case. So you would still be short of a few screws and o-ring.

If you can't find the missing items in a hardware store, you will have to contact EK (http://www.ekwb.com/support/) since we don't have a replacement part section in the webshop.

Mads1 · 10 Mar 2015 at 20:50

EK Luc said:
That's a bugger that the previous owner didn't provide the o-rings

I'm here!!

Sorry i'm still a little bit delayed with the PAX East that ended on sunday.

Again I don't understand why the previous owner didn't provide the o-rings and the screws

The O-ring size you need is 15x1mm (NBR70) 15mm being the inside diameter of the o-ring and the screws are M4x28 DIN7984.

Our multiple GPU bridges don't come with the screws and o-rings since you're suppose to use the ones you already have. We only give one screw and one o-ring just in case. So you would still be short of a few screws and o-ring.

If you can't find the missing items in a hardware store, you will have to contact EK (http://www.ekwb.com/support/) since we don't have a replacement part section in the webshop.

are the o-rings the same size to what is on the spacer's ive found 2 but they seem a bit to thick and a nightmare to put on, took me about half hour,just dont seem right to me, previous owner is sending the screws so just o-rings to get now.

but i did look for screws and i couldnt find them anywhere, thought this should be on the webshop as there seems to be a few people that ask for this, going through the contact system takes time, maybe EK should do this as a buy, like a mini spare parts ie: a couple of screws ,orings, spacer,stop plugs. Just seems darf to me this isnt something you offer.

EK Luc · 11 Mar 2015 at 15:58

Mads1 said:
are the o-rings the same size to what is on the spacer's ive found 2 but they seem a bit to thick and a nightmare to put on, took me about half hour,just dont seem right to me, previous owner is sending the screws so just o-rings to get now. but i did look for screws and i couldnt find them anywhere, thought this should be on the webshop as there seems to be a few people that ask for this, going through the contact system takes time, maybe EK should do this as a buy, like a mini spare parts ie: a couple of screws ,orings, spacer,stop plugs. Just seems darf to me this isnt something you offer.

What do you mean by spacer?

Mads1 · 12 Mar 2015 at 20:14

EK Luc said:
What do you mean by spacer?

spacer to put between a fitting if thread to long dont they use a 15x1 oring.

EK Luc · 12 Mar 2015 at 20:56

Mads1 said:
spacer to put between a fitting if thread to long dont they use a 15x1 oring.

Oh yes those little things! But I think the thickness of them is bigger than 1mm so it's probably why it won't work.