• Notice regarding image hosts and attachments. See here.

Finding my fsb speed?

Soldato
Joined
23 Mar 2007
Posts
2,553
Location
Essex
im looking to do a bit of overclocking soon but would like some help understanding a few things, i have cpuz installed but to me its all a bit to much, i would like to find out what my fsb speed is to start with and kinda go from there, im going to be upgrading my memory soon to 1066 and want to make sure im getting the best speed i can out of my memory.
I have checked my bios and i do have asus cool n quiet enabled just for the record dont really no how it works lol

I will put my cpuz details below

http://i151.photobucket.com/albums/s159/superJT26/cpuz.jpg
 
here's a tip: alt+print screen will copy the active window only, no need to white out the rest of your desktop!
 
cool thats one thing i have learnt lol how do i now go about finding out what speed my phenom is running at? do i have to x the multipler which in this case would be 16?

i will get there im sure of it :)
 
cool thats one thing i have learnt lol how do i now go about finding out what speed my phenom is running at? do i have to x the multipler which in this case would be 16?

i will get there im sure of it :)

Yep, bus speed times your multiplier will give you your cpu speed.
 
Thanks for that :)

Ram will be fine, you will most probably need to setup the speed, voltage and timmings manually in the BIOS.

Have a check throught he manual as this will hopefully show you what to look for, If you have any problem report back here.
 
many thanks mate, one final thing im going to have a play around get my new megahalems cooler tomorrow so once i have that installed going to maybe overclock my phenom II for the first time i see a lot of people easily getting 3.6ghz out of it, i have great cooling in my case (antec 1200) so really wanna give it a go, i think my vcore is on auto as it always seems to go up and down, i have cool and quiet enabled so i guess i will have to disable that, my main question is what is the stock voltage for a phenom? as i increase the mulitplyer would i have to increase the voltage as well? like i said its all been on auto till now so not to sure with it all

thanks again
 
No probs mate :)

Download Core Temp and hopefully this should show the vcore of your cpu, alternate the BIOS may show your default vcore next to the actual value, in your case this will show Auto, I will download the manual later to check.

With the voltage it may be the case of trial and error, increase the vcore slighty once overclocked and run prime, if this fails or BSOD increase the vcore some more until it's stable.
Unfortunately I don't have much expirience in overclocking AMD systems, hopefully someione might be able to shed some light.
 
i really appricate your help cant say thankyou enough i really feel i have a better understanding already.

I have core temp says its running at 1.3500v, the man thing i wanna no really is whats the max voltage you would want to give a cpu? and the lowest voltage you could give? i guess if i could say overclock to 3.6ghz at 1.3v that would be kinda good, im guessing if i tried it at 1.2v it prob would not even boot up! lol
 
hi guys im looking to lower the vcore on my stock 3.2 phenom II 955, just got a few last questions b4 i go ahead and do it, everything in my bios is set to auto as well as having cool n quiet enabled, i no i need to disable this option 1st but the main thing i want to no is what is a safe low vcore to run on a stock cpu? with the settings on auto its always around the 1.35v, just want to no by lowering this im guessing it will reduce the heat given off but by having a low vcore will i suffer gaming cos of it?

many thanks
 
Back
Top Bottom