First Time Builder - SG05

vince1

vince1

vince1

Associate
Joined
2 Apr 2009
Posts
81
Location
Essex
I'm currently building a new system in a Sugo SG05 with A Gigabyte board, I've connected all the front panel connectors except for one that splits off from the audio header labled AC. I'm probably being a complete moron here but where does that connect to?

Any help gratefully received as I'm slowly going insane trying to sort out all the cable

Thanks
 
AC97?

It should be connected to the AC97 onboard audio connector. Usually its located near the internal USB connectors.

Unless your board doesn't have one of course, which seems to be happening on the mobo's I've bought recently.

Edit: This may actually be complete nonsense...

I assume if you've plugged in the HD Audio header already, then the AC97 is just redundant.
 
Last edited:
Has anyone managed to fit a 2.5 and a 3.5 hard drive in a SG05, I've managed to fit the SSD but the bracket for the 3.5 is obstructed by the cable for the ATX power connector so I can't push the bracket all the way in so I can put the top of the case back on. Any help gratefully received
 
just blue tack teh ssd somewhere, they are cold and dont require cooling etc so can just stick em anywhere. or a pic would help? might need to just use some other cable etc.
 
i have 2 full size 2tb hdds in mine along with a tv tuner and dvdrw :) its tight but it fits :D

i have mounted the other hdd below the one in the cage using ali strip :)
 
Ch3m1c4L said:
just blue tack teh ssd somewhere, they are cold and dont require cooling etc so can just stick em anywhere. or a pic would help? might need to just use some other cable etc.
Click to expand...

Velcro is a little better than blu tac if you're planning on moving the case any time soon :)
 
You must log in or register to reply here.
Back
Top Bottom