First Timer Needing Some Advice!

[bryanlaycock]

Ive overclocked my E6320 up to 3GHZ but im a bit confused where to go from now. I know i can lower the voltage.

First of all my hardware.

E6320
2GB Geil 800Mhz Ultra Low Latency
8800 GTS 640MB
Gigabyte DS3P
Dtek Fusion Cpu Block
Ek GPU Block
Thermochill 120.2

and my settings

1.5v CPU Voltage
Ive got the RAM timings at 5-5-5-18 with + 0.2V
429 FSB
and the divider thing at 2.00
and some things switched off in advanced bios (from the guide)

I left TAT with 100% load over night and it reached 56C
and it idles at around 36C.

my GPU is 47C idle and 54C underload

my ram is running at 820 is that a problem? and where do i go from here? can i lower the RAM to 4-4-4-12 again?

 

[bryanlaycock]

ive just tryed 4-4-4-12 with +0.3V and it gets as far as loading windows then blue screens :S

 

[bryanlaycock]

Ok ive beeen tinkering annd im now a this

3.3Ghz
FSB 472
Ram 5-5-5-12

Vcore 1.45V
Vmem +0.3V
MCH +0.1V
FSB +0.1V

Divider 2.00
Ram 988

Temps using TAT

35C Idle
58C 100% for 3 Hours

Unfortunatly ive hit a brick wall soon as i go any further it just blue screens on the way into wwindows any ideas or is that it?

 

[bryanlaycock]

woooohooo 3.4GHZ!!! thanks mate temps look okay stress test time

 

[bryanlaycock]

Nope its not grrr