Hi all,
Recently i built this spec pc:
Intel Core i7-2700K 3.5GHz LGA1155 8MB 95W
Corsair Memory 8GB (2 x 4GB) Vengeance DDR3 1866MHz DIMM 240-pin CL9 Red
Gigabyte GA-Z68XP-UD4 LGA1155 Intel Z68 DDR3 ATX
EVGA GeForce GTX 560 Ti 448 Cores 797MHz 1280MB PCI-Express HDMI
Seagate 1TB Barracuda SATA 6Gb/s 64MB 7200RPM Hard Drive
OCZ Technology 60GB Agility 3 SSD Series SATA 6Gb/s 2.5" Solid State Drive
Corsair Memory 120GB Force Series 3 SATA 6Gb/s 2.5" Solid State Drive (Read 550MB/s, Write 510MB/s) Corsair Memory 120GB Force Series 3 SATA 6Gb/s 2.5" Solid State Drive (Read 550MB/s, Write 510MB/s)
Antec 900 Nine Hundred Ultimate Gamer Case (Black)
Corsair 850W Enthusiast Series TX850 Modular Power Supply
I am now going to overclock and fancied getting a diffrent CPU cooler, However i've decidied that my computer is too nosiy and would like to try water cooling.
I have been looking at the following:
XSPC Rasa 750 RX360 Water Cooling Kit XSPC Rasa 750 RX360 Water Cooling Kit
EK-VGA Supreme HF - Nickel Acetal EK-VGA Supreme HF - Nickel Acetal
EK-FC Bridge DUAL Serial 3-Slot EK-FC Bridge DUAL Serial 3-Slot
However, i am unsure of what extra piping i would need and connecters to connect this all together.
I'm assuming i'll be able to put it in a loop as so:
Resiviour
CPU
EK-FC bridge --> Connected to two time EK-VGA Supream HF's
Bridage to rad
rad to resiviour
Is this a functional way of doing it? If not what i have gotten wrong? What else would i need in terms of fittings and pipeing and what sizes would i need to get?
Thanks for your time.
Joe.
Recently i built this spec pc:
Intel Core i7-2700K 3.5GHz LGA1155 8MB 95W
Corsair Memory 8GB (2 x 4GB) Vengeance DDR3 1866MHz DIMM 240-pin CL9 Red
Gigabyte GA-Z68XP-UD4 LGA1155 Intel Z68 DDR3 ATX
EVGA GeForce GTX 560 Ti 448 Cores 797MHz 1280MB PCI-Express HDMI
Seagate 1TB Barracuda SATA 6Gb/s 64MB 7200RPM Hard Drive
OCZ Technology 60GB Agility 3 SSD Series SATA 6Gb/s 2.5" Solid State Drive
Corsair Memory 120GB Force Series 3 SATA 6Gb/s 2.5" Solid State Drive (Read 550MB/s, Write 510MB/s) Corsair Memory 120GB Force Series 3 SATA 6Gb/s 2.5" Solid State Drive (Read 550MB/s, Write 510MB/s)
Antec 900 Nine Hundred Ultimate Gamer Case (Black)
Corsair 850W Enthusiast Series TX850 Modular Power Supply
I am now going to overclock and fancied getting a diffrent CPU cooler, However i've decidied that my computer is too nosiy and would like to try water cooling.
I have been looking at the following:
XSPC Rasa 750 RX360 Water Cooling Kit XSPC Rasa 750 RX360 Water Cooling Kit
EK-VGA Supreme HF - Nickel Acetal EK-VGA Supreme HF - Nickel Acetal
EK-FC Bridge DUAL Serial 3-Slot EK-FC Bridge DUAL Serial 3-Slot
However, i am unsure of what extra piping i would need and connecters to connect this all together.
I'm assuming i'll be able to put it in a loop as so:
Resiviour
CPU
EK-FC bridge --> Connected to two time EK-VGA Supream HF's
Bridage to rad
rad to resiviour
Is this a functional way of doing it? If not what i have gotten wrong? What else would i need in terms of fittings and pipeing and what sizes would i need to get?
Thanks for your time.
Joe.