Fittings Advice

[scotsdragon]

On the 6th of next month Im looking at my next upgrade which will be to add a water cooled gtx780 into my current case CM Storm Stryker(which will be changed in a month or two) to do this im upgrading my current water cooling which is the

http://www.overclockers.co.uk/showproduct.php?prodid=WC-041-OE&groupid=2180&catid=2184


So i have read up abit and found that my current pump would probally struggle and a single 240 rad would probaly struggle a lot as i have my CPU (3570k) OC'ed to 4.5ghz

So i have come up with

YOUR BASKET
1 x OcUK Tech Lab H2O Custom GTX 780 3072MB GDDR5 Watercooled Graphics Card £599.99
1 x XSPC Razor GTX Titan GPU Waterblock **GTX 780 COMPATIBLE** £94.99
1 x OcUK Tech Lab - XSPC D5 Vario Pump & EK-D5 X-TOP CSQ Value Combo £81.98
1 x XSPC Photon 170 Tube Reservoir £37.99
1 x Hardware Labs Black ICE Radiator GT Stealth 240 £35.99
1 x Lamptron FC5 V2 5.25" Bay Fan Controller - Black £34.99
4 x Scythe Gentle Typhoon 120mm 1850 RPM - 3 Pin £14.98 (£59.92)
2 x XSPC EC6 Coolant Clear £8.99 (£17.98)
2 x Primochill Primoflex Advanced Tubing 16/11 - Clear £5.99 (£11.98)
Total : £987.79 (includes shipping : £10.00).



What is really stumping me is the Fittings as i want to go Chrome but also have it tidy and not sure which angle fittings and such to achieve this.

The lay out will be one

http://www.overclockers.co.uk/showproduct.php?prodid=WC-033-BX with Typhoons on the outside as i modded the roof when i got the rad upgrade on the kit

and the thinner Stealth on the bottom with everything else in between so any help would be awsome as i wish to have a nice clean looking but highly funtional setup thanks a lot in advance

 

[Tonester0011]

My fittings of choice - http://www.overclockers.co.uk/productlist.php?groupid=962&catid=2589&subid=2592


Layout i'd probably go Res>CPU>Top rad>GPU>Bottom rad>Res. The return tube from bottom rad to res would be the only thing the hide then.

 

[scotsdragon]

They are nice when i get an angled fitting i see they have one compression side and one threaded side do i need like a male to male connector for those?

 

[Hakanese]

YOUR BASKET
1 x Bitspower BP-BS60R G1/4" Silver Shiny Rotary 60-Degree IG1/4" Extender £11.99
1 x Bitspower G 1/4" 45 Degree IG 1/4" Adapter - shiny silver £6.98
1 x Bitspower G 1/4" 90 Degree IG 1/4" Adapter - shiny silver £6.98
1 x Bitspower 60 Degree adapter 1/4 to F 1/4 inches - Shiny Silver £6.34
1 x Bitspower BP-WTP-C77 G1/4" Silver Shining 30-Degree IG1/4" Extender £5.99
Total : £40.56 (includes shipping : £1.90).



With these you just add your compression or barb fittings of your choice on

 

[ubersonic]

Layout i'd probably go Res>CPU>Top rad>GPU>Bottom rad>Res.

Personally I would also use a pump

 

[scotsdragon]

Is those ek pump tops any good the xspc combo pump top looks good also?

http://www.overclockers.co.uk/showproduct.php?prodid=WC-001-TL

 

[omgitsdavie]

Ive got the xspc d5 and the pump top. great piece of kit