So the "new to me toy is working away. It seems to be uploading as I'm getting credits for the points, but the logs suggest there is something amis?
If I look in the fah work folder now, there is only files there related to wudata_03, which implies that 02 was in fact uploaded, but the logs haven't got it right?
For an equivalent WU last night it then went on to log:
This will be the v6 folding software running in linux.
So should I be concerned.
Code:
[18:03:36] Finished Work Unit:
[18:03:36] - Reading up to 64340496 from "work/wudata_02.trr": Read 64340496
[18:03:36] trr file hash check passed.
[18:03:36] - Reading up to 31675152 from "work/wudata_02.xtc": Read 31675152
[18:03:37] xtc file hash check passed.
[18:03:37] edr file hash check passed.
[18:03:37] logfile size: 192853
[18:03:37] Leaving Run
[18:03:41] - Writing 96369377 bytes of core data to disk...
[18:04:13] Done: 96368865 -> 91642359 (compressed to 5.9 percent)
[18:04:13] ... Done.
[18:04:13] - Shutting down core
[18:04:13]
[18:04:13] Folding@home Core Shutdown: FINISHED_UNIT
[18:04:14] CoreStatus = 64 (100)
[18:04:14] Unit 2 finished with 75 percent of time to deadline remaining.
[18:04:14] Updated performance fraction: 0.740770
[18:04:14] Sending work to server
[18:04:14] Project: 8101 (Run 7, Clone 4, Gen 330)
[18:04:14] + Attempting to send results [October 7 18:04:14 UTC]
[18:04:14] - Reading file work/wuresults_02.dat from core
[18:04:14] (Read 91642871 bytes from disk)
[18:04:14] Connecting to http://128.143.231.201:8080/
[18:04:14] - Couldn't send HTTP request to server
[18:04:14] + Could not connect to Work Server (results)
[18:04:14] (128.143.231.201:8080)
[18:04:14] + Retrying using alternative port
[18:04:14] Connecting to http://128.143.231.201:80/
[18:04:14] - Couldn't send HTTP request to server
[18:04:14] + Could not connect to Work Server (results)
[18:04:14] (128.143.231.201:80)
[18:04:14] - Error: Could not transmit unit 02 (completed October 7) to work server.
[18:04:14] - 1 failed uploads of this unit.
[18:04:14] Keeping unit 02 in queue.
[18:04:14] Trying to send all finished work units
[18:04:14] Project: 8101 (Run 7, Clone 4, Gen 330)
[18:04:14] + Attempting to send results [October 7 18:04:14 UTC]
[18:04:14] - Reading file work/wuresults_02.dat from core
[18:04:14] (Read 91642871 bytes from disk)
[18:04:14] Connecting to http://128.143.231.201:8080/
[18:04:14] - Couldn't send HTTP request to server
[18:04:14] + Could not connect to Work Server (results)
[18:04:14] (128.143.231.201:8080)
[18:04:14] + Retrying using alternative port
[18:04:14] Connecting to http://128.143.231.201:80/
[18:04:14] - Couldn't send HTTP request to server
[18:04:14] + Could not connect to Work Server (results)
[18:04:14] (128.143.231.201:80)
[18:04:14] - Error: Could not transmit unit 02 (completed October 7) to work server.
[18:04:14] - 2 failed uploads of this unit.
[18:04:14] + Attempting to send results [October 7 18:04:14 UTC]
[18:04:14] - Reading file work/wuresults_02.dat from core
[18:04:14] (Read 91642871 bytes from disk)
[18:04:14] Connecting to http://128.143.199.97:8080/
[18:04:14] - Couldn't send HTTP request to server
[18:04:14] + Could not connect to Work Server (results)
[18:04:14] (128.143.199.97:8080)
[18:04:14] + Retrying using alternative port
[18:04:14] Connecting to http://128.143.199.97:80/
[18:04:14] - Couldn't send HTTP request to server
[18:04:14] + Could not connect to Work Server (results)
[18:04:14] (128.143.199.97:80)
[18:04:14] Could not transmit unit 02 to Collection server; keeping in queue.
[18:04:14] + Sent 0 of 1 completed units to the server
[18:04:14] - Preparing to get new work unit...
[18:04:14] Cleaning up work directory
[18:04:14] + Attempting to get work packet
[18:04:14] Passkey found
[18:04:14] - Will indicate memory of 32155 MB
[18:04:14] - Connecting to assignment server
[18:04:14] Connecting to http://assign.stanford.edu:8080/
[18:04:15] Posted data.
[18:04:15] Initial: 8F80; - Successful: assigned to (128.143.231.201).
[18:04:15] + News From Folding@Home: Welcome to Folding@Home
[18:04:15] Loaded queue successfully.
[18:04:15] Sent data
[18:04:15] Connecting to http://128.143.231.201:8080/
[18:04:22] Posted data.
[18:04:22] Initial: 0000; - Receiving payload (expected size: 30312086)
[18:04:29] - Downloaded at ~4228 kB/s
[18:04:29] - Averaged speed for that direction ~2937 kB/s
[18:04:29] + Received work.
[18:04:29] Trying to send all finished work units
[18:04:29] Project: 8101 (Run 7, Clone 4, Gen 330)
[18:04:29] + Attempting to send results [October 7 18:04:29 UTC]
[18:04:29] - Reading file work/wuresults_02.dat from core
[18:04:29] (Read 91642871 bytes from disk)
[18:04:29] Connecting to http://128.143.231.201:8080/
[18:04:29] - Couldn't send HTTP request to server
[18:04:29] + Could not connect to Work Server (results)
[18:04:29] (128.143.231.201:8080)
[18:04:29] + Retrying using alternative port
[18:04:29] Connecting to http://128.143.231.201:80/
[18:04:29] - Couldn't send HTTP request to server
[18:04:29] + Could not connect to Work Server (results)
[18:04:29] (128.143.231.201:80)
[18:04:29] - Error: Could not transmit unit 02 (completed October 7) to work server.
[18:04:29] - 3 failed uploads of this unit.
[18:04:29] + Attempting to send results [October 7 18:04:29 UTC]
[18:04:29] - Reading file work/wuresults_02.dat from core
[18:04:29] (Read 91642871 bytes from disk)
[18:04:29] Connecting to http://128.143.199.97:8080/
[18:04:29] - Couldn't send HTTP request to server
[18:04:29] + Could not connect to Work Server (results)
[18:04:29] (128.143.199.97:8080)
[18:04:29] + Retrying using alternative port
[18:04:29] Connecting to http://128.143.199.97:80/
[18:04:30] - Couldn't send HTTP request to server
[18:04:30] + Could not connect to Work Server (results)
[18:04:30] (128.143.199.97:80)
[18:04:30] Could not transmit unit 02 to Collection server; keeping in queue.
[18:04:30] + Sent 0 of 1 completed units to the server
[18:04:30] + Closed connectionsIf I look in the fah work folder now, there is only files there related to wudata_03, which implies that 02 was in fact uploaded, but the logs haven't got it right?
For an equivalent WU last night it then went on to log:
Code:
[18:59:53] Completed 5000 out of 250000 steps (2%)
[19:13:24] - Autosending finished units... [October 6 19:13:24 UTC]
[19:13:24] Trying to send all finished work units
[19:13:24] Project: 8101 (Run 10, Clone 1, Gen 330)
[19:13:24] - Error: Could not get length of results file work/wuresults_01.dat
[19:13:24] - Error: Could not read unit 01 file. Removing from queue.
[19:13:24] + Sent 0 of 1 completed units to the server
[19:13:24] - Autosend completed
[19:14:02] Completed 7500 out of 250000 steps (3%)This will be the v6 folding software running in linux.
So should I be concerned.
