Fractal Design - Define R6 Blackout Type-C

m@rty · 14 Apr 2019 at 13:17

Hi Guys,

Does anyone have this case and could answer a quick question?

(https://www.overclockers.co.uk/frac...t-type-c-midi-tower-case-black-ca-07s-fd.html)

I'm wondering if it will accept a 240mm radiator in the roof of the case, specifically the Corsair H100i V2.

Cheers

LewisStuart · 14 Apr 2019 at 18:18

Should be ok, just took the dust filter off my R6 to check.

I have the 360 H150i pro in the roof.

rocketman · 15 Apr 2019 at 21:45

m@rty said:
Hi Guys,

Does anyone have this case and could answer a quick question?

(https://www.overclockers.co.uk/frac...t-type-c-midi-tower-case-black-ca-07s-fd.html)

I'm wondering if it will accept a 240mm radiator in the roof of the case, specifically the Corsair H100i V2.

Cheers

I have this case, and I'm also using a Corsair H100i v2 in the roof, along with a Blu-ray drive in the top bay. The only thing I will say is I'm using this RAM: https://www.overclockers.co.uk/team...al-channel-kit-grey-tlgd416g30-my-087-tg.html and it just touches the radiator, so you may have issues with tall memory modules.

dannywaugh1 · 15 Apr 2019 at 22:11

@rocketman do you know if a disc drive and a front 360 aio will fit?

rocketman · 15 Apr 2019 at 22:18

dannywaugh1 said:
@rocketman do you know if a disc drive and a front 360 aio will fit?

No, 280 is the max at the front if using an optical drive. Take a look at the manual: https://www.fractal-design.com/media/ce46a531-d80e-4c10-82c9-ae19d42d53e7. This shows you different aio sizes/configurations, pages 25 onwards

dannywaugh1 · 16 Apr 2019 at 21:55

rocketman said:
No, 280 is the max at the front if using an optical drive. Take a look at the manual: https://www.fractal-design.com/media/ce46a531-d80e-4c10-82c9-ae19d42d53e7. This shows you different aio sizes/configurations, pages 25 onwards

Amazing thanks!

m@rty · 19 Apr 2019 at 11:48

Update - 240mm fitted fine in the roof of the case, I was assuming it would be pre-drilled holes in the case for the screws but it's simply a rail which the screws pass through, therefore you can "slide" the radiator in to position and then tighten the screws.

As alluded to earlier though, I would say that fitting an optical drive may be quite tight depending on where you place the radiator.