Freezer Pro64 Owners

Tim_Cdy · 1 Jan 2007 at 02:30

Hi. I've had an idea about installing a custom braket. Taking off the Fan and black housing, and fixing the braket to the heatsink. My question is, would this cause irreparable to the Heatsink :confused:

. For a Ducting Project idea.

thefishdude · 1 Jan 2007 at 11:29

deepnds on what you mean attaching ?? we taking glue ? welding? sticky tape ? lol

aslong as you dont damage the fins to much should be fine.

Tim_Cdy · 1 Jan 2007 at 18:15

I was thinking glue. That feels safer to me. Anyway thanks

IceShock · 1 Jan 2007 at 22:40

i dont have a arctic thingymbob but i have a modified amd heatpipe heatsink.

depends what you want doing to it, (im not sure of the arctic thingy fan size) but you can get a custom tube things now that can fit onto a 8cm socket alowing a 12cm fan to fix onto it.

http://www.overclockers.co.uk/showproduct.php?prodid=FG-022-AK

Tim_Cdy · 3 Jan 2007 at 20:05

Thanks IceShock.

I will need a 120mil thingy. A Freezer 64 is hooj, and as such, i am going to lose a fan.
Basically, any bracket, will press up and against the side fan. The mobo takes up the entire tray and a few millimeters over. Space is realy tight.

Had an idea to create a air tube for the Dimms. I reckon on attaching it, off the middle of the flume. Most of the Dimms Airspace, will be consumed by the Ducting! I will have to move them to Channels 3&4. Looks like i will have to take the tube to exhaust through the side. Looks like i will need custom fan mounts too. Airflow will be from the Psu, past an Amber120. It will flow over the Pci Cards and up past the Sata drive. Not good.

i dont have a arctic thingymbob

but i have a modified amd heatpipe heatsink.

Can you elaborate on this please