Hi guys, I need some advice. A friend of mine has the following PC which I built for him about 28 - 30 months ago.
Athlon XP2400+, Asus A7V8X-X,
512 Crucial Ram
Maxtor 120 HD and WD 40 Gb
Pioneer 110D and LG DVD
He has always had a problem of every couple of months, usually after 8 months of a PSU always blowing and needing to be replaced. These include Sumvison 400 and 500 watts with 24 Amps on the 12v rail, and some other brands which he has got himself with 20 amps on the 12v rail, more than enough for a Athlon XP, as I ran one on a 400W qtec with 18 amps on the rail and no problem.
In the time he has had it, it has blown 6 PSU's and this latest one took the 40 Gb WD drive with it. Any ideas as to what, as I have checked for shorting by re-assembling the system, and I have never had any problems like this on any computers I have built for people, including myself.
My ideas are either something is drawing a lot of power on the Mobo or components due to a fault, as the 24 amps rail PSU lasted longer before it blew than his unbranded ones.
Or I think, it is the heat in his room, as it is as hot as 31 - 32 degrees in his room, sometimes more in the summer even with windows and a fan on. His chip can get to 75 on load (though I think his sensors are out a bit as the HSF don't feel that hot, more like low to mid 60's), even though I created airflow and tidyed his cables and got one intake and one exhaust. I had to redo his paste, as it hit 95 degrees and shut down, due to no paste on the chip left and dust and it did feel like 90 + on the HSF.
Could heat these failiures or some component. Any help is appreciated and sorry for the long post.
Athlon XP2400+, Asus A7V8X-X,
512 Crucial Ram
Maxtor 120 HD and WD 40 Gb
Pioneer 110D and LG DVD
He has always had a problem of every couple of months, usually after 8 months of a PSU always blowing and needing to be replaced. These include Sumvison 400 and 500 watts with 24 Amps on the 12v rail, and some other brands which he has got himself with 20 amps on the 12v rail, more than enough for a Athlon XP, as I ran one on a 400W qtec with 18 amps on the rail and no problem.
In the time he has had it, it has blown 6 PSU's and this latest one took the 40 Gb WD drive with it. Any ideas as to what, as I have checked for shorting by re-assembling the system, and I have never had any problems like this on any computers I have built for people, including myself.
My ideas are either something is drawing a lot of power on the Mobo or components due to a fault, as the 24 amps rail PSU lasted longer before it blew than his unbranded ones.
Or I think, it is the heat in his room, as it is as hot as 31 - 32 degrees in his room, sometimes more in the summer even with windows and a fan on. His chip can get to 75 on load (though I think his sensors are out a bit as the HSF don't feel that hot, more like low to mid 60's), even though I created airflow and tidyed his cables and got one intake and one exhaust. I had to redo his paste, as it hit 95 degrees and shut down, due to no paste on the chip left and dust and it did feel like 90 + on the HSF.
Could heat these failiures or some component. Any help is appreciated and sorry for the long post.
Last edited: