• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Fritz Chess Benchmark/Super PI Thread 2010

e7200.jpg


My HTPC in the lounge.

E7200 @ 3.6GHz

Super PI 15.512
Fritz 4758
 
Last edited:
Marine Iguana said:
Hmm i seen to be going down on the list damm useless cpu, hopefully that will change when i receive my WC part's :D



I would imagine he already has one in his pocket :D
Click to expand...
Dropped down a few places as well since the table started, may try for 4.2ghz, got my beasty 2000 rpm fans on my TRUE now, hopefully they should give me a bit more headway as far as temps go, normally run 400-1200 rpm pwm sharkoon silent eagle se's (nice and quiet) the 2000 rpm's are a bit loud but cool very well, ive sen a 6c drop in load temps since using them.
 
Well i needed to see if i could get a bit higher so stuck it up to 4.2Ghz and it didn't crash :)
fritz.jpg

SuperPi-1.jpg

Also realised my memory timings were at 9-9-9-28 so put them to 8-8-8-24.
 
41ghzFRITZ.jpg


update please replace my old score

4.1GHZ

super pi =16.594
FRITZ=9930

GETTING 4.1GHZ STABLE FOR FRITZ WAS NOT EASY AND I THINK THAT PUTS ME AT THE TOP OF THE PHENOMS :p COME ON YOU AMD OWNERS PULL YOUR FINGER OUT
 
Last edited:
No problems.

I've got an unlocked 550.
To get that score I upped the multi to 20 (200x20)
Pushed the Voltage to 1.5 (If I get a better cooler I'll up it further but my Fenrir is maxed on these settings with temps of 61)
My NB and HT are both x11 so both 2200Mhz. I gave the NB 0.1v more and it's happy.
My ram timings I'm still working on..
It's at 2.0v (undervolted 0.1) running at 1066Mhz with timings of 5-6-6-20 (I think theses a lot more to be had from this ram but I've not had the time to tinker)

Considering my chip was a 550 the scores are indeed unsual but unlocked it is effectively the C2 stepping of the 955/965 :)
 
reiyushin said:
No problems.

I've got an unlocked 550.
To get that score I upped the multi to 20 (200x20)
Pushed the Voltage to 1.5 (If I get a better cooler I'll up it further but my Fenrir is maxed on these settings with temps of 61)
My NB and HT are both x11 so both 2200Mhz. I gave the NB 0.1v more and it's happy.
My ram timings I'm still working on..
It's at 2.0v (undervolted 0.1) running at 1066Mhz with timings of 5-6-6-20 (I think theses a lot more to be had from this ram but I've not had the time to tinker)
Click to expand...

i can't seem to get anything out of my dominator ram http://www.overclockers.co.uk/showproduct.php?prodid=MY-197-CS&groupid=701&catid=8&subcat=1517
probably cause i'm scared to up the voltage as i have know idea what the max they can take is they are currently at the recommended 1.65v 8,8,8,24,2t

my 4ghz run needed a ht of 2600, with a 0.75V increase to the NB-CPU and a CPU Volatge of 1.5 it proved fairly stable i seem to have found to pass fritz it will also pass some prime and IBT aswell.

gonna keep working on overclocking a 4.2GHZ but until i get some confirmation on the max voltages allowed for cpu-nb and v core then i'm gonna sit tight
 
I'm not sure on the NB voltage max but as for vcore I've seen plenty of people run 1.55v 24/7 which is ok as long as your temps are kept in check. (and some people running 1.6v just for benches...psychopaths!!!!)

4.2 would be an awesome clock :) That Baram must be a hard worker :)
I've definately hit the max on my current cooling but I think I can get 4Ghz stable with a bit of work :) even if I do I'll not run it there, I've seen no improvement in games past 3.3Ghz.
 
bigjimmyauk said:
Who checking the thread to see updated scores as i got a higher score and higher clock.
will these be looked into?page 7 post 186
Click to expand...

When geckovich sees the thread he will update the table.

However... page 7, we're only up to page 3 if you use a manly number of posts per page ;)
 
Updated - CPU speed is 4242MHz and multi is x21



Benchmarks are better in XP 32-bit than W7 64-bit

CPU: 4.242
Fritz: 7748
SPI: 9.906s
 
You must log in or register to reply here.
Back
Top Bottom