Fritz Chess Benchmark/Super PI Thread 2010

Columbo · 12 Mar 2010 at 07:36

Q6600 @ 3.7

Mobo - MSI P35 Neo2 FR
Vcore - 1.475v
FSB - 412

Angst · 12 Mar 2010 at 16:35

It's a bit slower than i expected but then i guess that may be because of the ddr2 ram.

chipps101 · 12 Mar 2010 at 19:35

i just took a machine that i built years ago back as a part exchange so decided to play about with it and so far without any voltage increases i have managed to do this -
stock-

2.5-

athlon 62 3200+ @ 2.5
motherboard - Abit AN8-V
vcore - 1.410
fsb - 250
anyone got any idea what would be a good overclock on this and any suggestions getting there ?
cooler is an artic cooling alpine 64 and 42c is the highest its went so far at 2.5ghz
memory is 2 x 512 mb ocz premier ddr 400 cl 2.5 and its running at 418 at 2.5ghz (set at 333 in bios)

i tried 260 fsb with the memory set to 266 and the ht thing at x 3 but the machine wont even switch on at that and hard to reset the cmos

86JR · 14 Mar 2010 at 21:56

No Q9450's on the list so:

Note i can OC to 3.6ghz but i have issues with BF BC2 stuttering, so i run a mild OC.

the-tazs · 14 Mar 2010 at 22:08

Not bad for a 955 c2 lol

TK421 · 15 Mar 2010 at 23:07

Is this table still getting updated?

rjk · 16 Mar 2010 at 00:26

why does fritz not recognise 12 threads?

i only get 8 show up

Marine Iguana · 16 Mar 2010 at 00:28

*Bounces off walls*

easyrider · 16 Mar 2010 at 00:32

rjkoneill said:
why does fritz not recognise 12 threads?

i only get 8 show up

AMD or INTEL Hex?

rjk · 16 Mar 2010 at 00:33

does the program not support it?

i assumed Fritz supported unlimited thread counts?

easyrider said:
AMD or INTEL Hex?

AFAIK amd hex doesnt HT

easyrider · 16 Mar 2010 at 00:35

rjkoneill said:
AFAIK amd hex doesnt HT

Oh yeah

rjk · 16 Mar 2010 at 00:36

im rather dissapointed

bed now

easyrider · 16 Mar 2010 at 00:38

eddie86 · 16 Mar 2010 at 21:30

TK421 said:
Is this table still getting updated?

There have been quite a few new posts recently so I'll stick an update in soon, will prob have to be at the weekend now though as I'm really busy with work.

Angst · 16 Mar 2010 at 22:23

here's a resubmission after pushing my cpu a bit further.

rjk · 17 Mar 2010 at 17:04

tried it to confirm

on the third gulftown i have used

max thread count is 8, it will not let me select 12

kitfit1 · 17 Mar 2010 at 18:22

rjkoneill said:
tried it to confirm

on the third gulftown i have used

max thread count is 8, it will not let me select 12

Assuming that Cpuz sees your Gulftown as having 6 cores and 12 threads, it must be that Fritz only sees a maximum 8 threads.

gurusan · 20 Mar 2010 at 21:08

TK421 · 20 Mar 2010 at 22:39

gurusan said:

hey mate! how does this i3 compare to your E8400?

gurusan · 20 Mar 2010 at 22:41

No difference. It's the new hotness but the E8400 was just as fast....and also memory performance is terrible on the i3...for some reason even worse than having the memory controller in the IMC.

I only have it because I am on my way to an i5 750 but couldn't afford it, so this is a stopgap CPU.