• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Fritz Chess Benchmark/Super PI Thread 2010

My offering (4.7GHz)

fritzandsuperpi4700MHz.png
 
I very nearly got under 9 seconds in 1m super PI, but I couldnt get any ower than this, and the BSODs were too much to handle lol!

But I discovered that my system is stable on 210 BCLK, 20x CPU ratio, and the ram at 1680 Mhz at 6-7-6-18, so I get an extra 80 Mhz on my ram.



The ram I have will go up to around 1700 Mhz on 6-7-6-18, and 1750 Mhz on 6-8-6-20, but my CPU wont go any higher than 4.2 Ghz, and raising the ram higher needs too much BCLK. I cant use a different ram multiplier because my CPU only goes up to 21x.
 
bhavv said:
I very nearly got under 9 seconds in 1m super PI, but I couldnt get any ower than this, and the BSODs were too much to handle lol!

But I discovered that my system is stable on 210 BCLK, 20x CPU ratio, and the ram at 1680 Mhz at 6-7-6-18, so I get an extra 80 Mhz on my ram.

The ram I have will go up to around 1700 Mhz on 6-7-6-18, and 1750 Mhz on 6-8-6-20, but my CPU wont go any higher than 4.2 Ghz, and raising the ram higher needs too much BCLK. I cant use a different ram multiplier because my CPU only goes up to 21x.
Click to expand...

Don't give up bhavv. Loosen your memory a bit and you will get there. Just done another go with mine and here's what I got, and i'm only using a noctua NH D14

dbqjaf.jpg


Validation http://valid.canardpc.com/show_oc.php?id=1658024
 
Yep. Only run Super PI. Fritz will cause BSOD and i'm already idling @ 55C so can't risk adding more volts.:(

The good thing is, I finally managed to contribute to Overclockers UK Team in HWBot. :D

2eby00h.jpg


2im00t0.jpg


Not bad eh?:p
 
Last edited:
reygjabla said:
Don't give up bhavv. Loosen your memory a bit and you will get there. Just done another go with mine and here's what I got, and i'm only using a noctua NH D14
Click to expand...

My memory isnt whats becoming unstable, even though its being pushed to its Cas 6 limit. It reaches around 1750 Mhz Cas 6, but needs loosening to Cas 8 to go up to 1850. It barely has much headroom at Cas 7, and it wont go over 1850 Mhz with 6 dimms installed, so clocking on Cas 6 around 1600-1750 Mhz gives me the best performance out of it.

I dont think my CPU / BCLK will go any higher.
 
Last edited:
been trying all day to get a decent oc for a pi run for the hwbot site on my e5200 but can't get anywhere even close to the guys using high end cooling and Ln2 :(

but this should be enough to put me in fourth for a dual core in our fritz chart :)


E5200 @ 4.3 :)
abit ip35
fsb 344
superPi - 13.250s
Fritz - 5772

not to shabby but can't get near the guys at the top of the hwbot charts.
 
Last edited:
You must log in or register to reply here.
Back
Top Bottom