FX8350 Throttling

daz87uk · 18 Oct 2015 at 10:56

S5siE_ibwi7BZepX1u6q8QFHFwcKWRnGb_oQpzVy3SPRLVcwQAFqruIWOK_DsreIqIHIiUT_2rKjIPmGRy665sV-3bJbsGydGyU9Kn6CRrdHNmmwIYHfVNM8WCrwL10f10c5WpfMzG-ZqjilxA75KrgfMBVPUY8si7w2S2zJnAzS3HgKj7TVskR6znpGenFTD1FHqTjcE4B31uCNskIWyLKeanULb_n_61SDs7gTYXSbm-cdK-KU0ujMkf-QqKnIjmyroTx_Fwh6FWNDALD57N0PkpytRZFdFNoN7sOpvdL6_mi4693cOqAM-xFkUqsNY-12CpLMMNklzJlYkrqzyMXcnUwJINgAwR0cSfbNGUT9SVgl_XQ3BJK1sDUklLnu7MwpdVBaKNg0mmaVYh4k1eb5tgzOCPvxxksd6w7uEp_7x-rKz-ed5Jaqgs6L-7wT9cFE3zaElP2VaOlNLvlRYIl-6W9-ebG5cdHeTt5TeInJ5CjdTt2GnlXKegSbZhLyouMWqjb_tRCELm2dknb3sj0bgDEShPLREbyiyeG-J6k=w906-h359-no

sent a few questions to MSI about the board temps but so far they have replied only to say. TMPin1 is not a real reading, and have I added system fans... I can see I'm going to get far here. Anyway, Heat gun matches the temps of tpin1 and is it also coincidence that its also the same reading that kills the cpu when it hits 100c every time without fail.

This never ends well · 18 Oct 2015 at 18:10

Where was you pointing the gun.

daz87uk · 18 Oct 2015 at 19:55

fx63007850 said:
Where was you pointing the gun.

I forgot to say, but 92c is coming from the corner of the VRM under the heatsink.

The other temp is pointing at cpu.

I think I may have just solved it though. The corsair thumb screws screw up really easy and I think I was bending the board a little. I've just loosened the screws and the cpu is now 33c with prime95. and vrm is 78c :rolleyes:

This never ends well · 18 Oct 2015 at 23:30

Hmm may have to buy myself a temp gun to try work out what the sensors are.

Thats a good drop in temps and have you tried lower volts yet.

Relentless81 · 19 Oct 2015 at 08:21

I have the LLC on mine set to Medium on a Gigabyte board for a 5.0GHZ OC, if I change it higher or lower the voltage is all over the place and it becomes unstable