GeIL 2GB-Command Per Clock Setting

[Exibit]

Hi Guys

I am using GeIL 2GB (2x1GB) PC6400C4 800MHz on a Asus P5N32-E SLI
What I want to know is what the following settings should be - Had to leave the Command Per Clock on Auto as I was not sure what the setting should be ??

Currently set at the following

Voltage 2.1V

tcl - 4
trcd - 4
trp - 4
tras - 12

Command Per Clock (CMD) - Auto

 

[WJA96]

You can try 1T, but I doubt it will work - you'll most likely need 2T.

 

[Spurs4ever]

Yes its a two clock cycle for these chips. Bought the same board and memory only yesterday and had fun setting it up. Finally reallised what to do to get the memory running as it should be around 2am this morning

But yes, you will need 2 clocks (2T) for those chips.

You will aslo need to dump to voltage up to 2.1V to get them to perform at that level mind you.