Geil Memory Settings In the Bios - Help

Exibit · 10 Feb 2007 at 22:41

Hi Guys

I am stuck and need a little advice for a neewb

I have the following motherboard Asus P5N32-E SLI - Geil Memory

Now I want to enter the correct memeory settings into the bios and this is where I am stuck they should be 4-4-4-12 2.1V but I am not sure where to senter these settings as I dont want to screw it up

Thks

Arclite · 11 Feb 2007 at 01:27

If it is the Geil PC6400 ultra ram it should say 4-4-4-12 timings and 2.1V on the cover. Im running 2gb of this ram at those settings.

critom · 12 Feb 2007 at 18:19

I have the same ram (Geil ultra low) in an Asus P5B vanilla the problem is if i leave all at auto, cpz and sandra reports the speed as 5.5.5.18. Run memtest for 14 hours and no glitches it gets recognised as pc2-6400(400mhz) no problem. So i go into the bios and set it at 4.4.4.12 voltage to 2.1v and 800mhz (the correct settings) also read somewhere that 2.0v might work but no i get problems in memtest within the 1st pass. Not looking to overclock would just like to find a way to run at the stated settings. Any ideas?.

Exibit · 13 Feb 2007 at 07:58

I want to know the same information, I would like to know all the settings that are needed for the Asus Bios 1T or 2T ect... ???

Slinwagh · 13 Feb 2007 at 08:40

I would say regardless of timings keep the RAM at 2.1v That seems to to be what most are using without any issues.