gigabyte 550ti oc version

[ukxenon]

gigabyte 550ti are these temps right

i was unable to get my card to be stable so i sent it back and it came back as working so i got in-touch with gigabyte and rma it and got a new one back and this time all is ok but i am a little worried with the temps..


i ran furmark for 15 min and tempts hit 92c / 196f with fan speed at 100% at idle it hits 30c to 33c

i have 2 front fans blowing in and a huge heatink on push pull and a 140mm at top pulling.

any advice is welcome..

 

[ukxenon]

GPU Core Clock [MHz]=969.1

GPU Memory Clock [MHz]=1050.0

GPU Shader Clock [MHz]=1940.0

GPU Temperature [°C]=92.0

Fan Speed (%)=100

Fan Speed (RPM)=1710

Memory Used [MB]=160

Memory Controller Load=99

Video Engine Load=0

VDDC [V]=1.1000

 

[ukxenon]

a little selfish bump for advice

 

[Azen]

I've heard some cards react badly to Furmark, - how does it behave with Heaven?/ 3d mark?

 

[ukxenon]

getting Heaven now will post back after i have run it and found out thank you for that

just ran haven and it was 68c at highest going to run 3d mark now

unable to run 3d mark i get some error message

 

[Azen]

"Some error" message being?

Furmark pushes the card to it's absolute limit, in fact pushes them so hard some newer cards have detection on them that wakes up when furmark is run and will slow the card clocks down drastically to stop it getting overworked.

So long as you can run those 3d benchmarks and games with no artefacts or serious errors it should be ok.

 

[ukxenon]

thank you i now have a little peace of mind

 

[mranderson]

furmark doesn't like nvidia cards. haven temps seem right