• Competitor rules

    Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.

Gigabyte Aorus 3080 Ti Master -- will it fit in a Define R6?

Moleyman

Moleyman

Moleyman

Associate
Joined
29 Mar 2015
Posts
97
Location
Norwich, Norfolk
Hi,

I have preordered this GPU and just wondered if anyone had fitted on into a Fracctal Define R6 without any issues?

My main concern is that the R6 takes a max width GPU of 155mm including power connectors - the card itself is 140mm wide, so I'm wondering if it might be a bit of a tight fit.

Any advice would be greatly appreciated.

Thank you very much,

Moley
 
It looks like the 8 pin power connectors are slightly set back in the Gpu so shouldnt be a problem.

Check out some images to confirm.
 
I fitted a 3090FE into my Fractal Design R6, and that's 138mm wide. The main issue was length - I had to reconfigure the case into an open configuration to get it to fit. But that did help with cooling, so it was worth the hassle.
 
Thanks for the replies.

I was hoping that it would fit length-wise without having to change the internal layout. The card is listed as 319mm long which is about the length that is available before the drive cage area. I don't have anything in the lower drive cage area so I'm hoping that if the card needs to the tail end can just fit in to the drive cage area - hope that makes sense.

@Ravenger - how much "too long" was your 3090FE, if you don't mind me asking?

Thanks again,

Moley
 
You must log in or register to reply here.
Back
Top Bottom