gigabyte brix help

esie999 · 7 Mar 2014 at 04:27

hi there, ive just finished putting in the ram and ssd into my gigabyte brix, ive plugged the hdmi cable into it and im not getting any signal to my monitor.
anyone got any ideas?
thanks
esie

esie999 · 7 Mar 2014 at 06:29

yes, the power cable is plugged in also, and the little blue light is on, but no signal to my monitor

esie999 · 7 Mar 2014 at 14:23

its not posting at all, i spent most of the morning doing a search on the net, and found that im using 1.5v ram, and i need to use 1.35v ram

esie999 · 8 Mar 2014 at 00:06

Kingston HyperX Plug and Play 8GB (2x4GB) 1600MHz and a scandisk 128gb msata ssd

esie999 · 8 Mar 2014 at 00:08

Jamin280672 said:
I figured it was probably your RAM as its the only major thing you added to the board, the SSD wouldn't stop the computer from posting, have you tried with just one stick of the RAM you have, sometimes if you can get it to fire up and get into the bios, you can then configure things to your likings and specs.

yea, ive tried with just the 1 stick of ram, any recommendations on what 1.35v ram i should get, ideally want 8gig without spending a fortune