Gigabyte G1.Sniper Z87

Caporegime
Joined
17 Jan 2010
Posts
66,731
Location
weston-super-mare
Look at this new board with an RRP of £120 :)

http://uk.gigabyte.com/products/product-page.aspx?pid=4802#ov
http://www.overclockers.co.uk/showproduct.php?prodid=mb-477-gi&groupid=701&catid=5&subcat=2574


9149_big_zpse85b5094.jpg


3560_zps73b94d5b.jpg


• creative core3d sound
• op-amp upgrade - http://uk.gigabyte.com/products/product-page.aspx?pid=4724#ov
• nicichon audio capacitors
• gold plated audio connectors.
• audio noise guard with path lighting
• killer nic
• sli+crossfire @ 8x/8x

for £120 it looks like a great board packed with the above features.



Combine it with some green LED RAM for epicness,

http://www.overclockers.co.uk/showproduct.php?prodid=MY-044-AR&groupid=701&catid=8&subcat=1392

MY-044-AR_73791_600.jpg
 
I cant get into my bios, my pc reboots too quick and i dont think my Logitech G510 powers up fast enough before windows is loading lol. I want to OC the cpu to 4.4 as initial test but currently cant get into the bios to do it hahah

Try your keyboard in different USB ports, hammer the DEL key for what its worth, reset the CMOS and power back up should make it enter the BIOS.

Did you enable one of the quick boot options in the BIOS? one of them I seem to remember is just too quick and as it loads drivers after it has booted this means your keyboard does sod all during the post start up procedure.
 
The problem is with front outputs that the wire acts like an antenna all the way from the bottom rear of the board, usually past the PSU at the bottom of most cases, then passing up inside the case and out at the front.

God knows what interference and crap this cable picks up along the way from other sources.
 
f3 release is out now it updated both bioses one after the other and now cant flash back to anything from before. It says bios is protected from using this bios. I need f2 back because now display driver keeps crashing every 2 mins and its driving me insane cant play any games :(

The board has a main and backup BIOS switch,, flip it and use the BIOS on the other chip.
 
There are two switches by the ram slots.

One is single and dual bios mode and the other is a main/backup bios switch.

You cant flash both at the same time as you can only use one at a time.
 
I know it was in dual bios and main bios at the time and it flashed both one then the other it said this on screen at the time eg flashing main bios then flashing backup bios. some how they made it work like this don't know how or why but its annoyed me something crazy!

Dont think ive ever seen that before.
 
Back
Top Bottom