got this through the post a few wee questions..

[Geekazoid]

Thermalright Ultra 120 eXtreme Intel BP 120mm Heat Sink (Without Fan)
and
X2
120mm Sharkoon System Fan Power 39dB(A) 2400 rpm Case Fan with 81cfm!

1) the 2 Sharkoon fans shall i plug one in to the cpu fan header on the motherboard and the other fan also in a system fan header on the mobo?? would this be fine for my motherboard (not overloading etc) i be running the fans on max setting all the time through this hot patch of weather???

2) people with i7 920 cpu and thermalright heatsinks how did u apply your termal paste on the CPU a pea sized blob in the middle on the cpu with non on the heatsink or did you follow the AS5 way on there website for the i7 cpus??
http://www.arcticsilver.com/ins_route_step2intelas5.html

thank you

 

[Geekazoid]

wow

i had difficulties the fans i orderd didnt have gaps between the holes to mount the fans with the clips that the True came with i was stumped so i used my noggin drilled holes at top of fans and put cable ties around them to secure them... also im running one fan on the MOBO cpu header and the other on sys fan 3 header... how can i tell if both fans are running full tilt as in bios it doesnt say the sys fan 3 speed??? i know CPU header fan is running on full cos its 3pin plugged into 4 pin mobo connection...

also which way do fans blow open side they suck in from and side with thin wire running down a thin cross frame the blow out from right??? if so my setup is right...