GPU temps high for custom loop?

[trawetSluaP]

Hi all.

Am posting regarding the build in my signature.

Currently I have three radiators - one on top exhausting, one of bottom exhausting and one on front as an intake.

CPU is overclocked to 4.6GHz at 1.18v and temps reach around 70C when gaming and GPU reaches around 50C.

Some people have commented saying my GPU is getting a bit too hot for the cooling I have in place. Would you agree?

If so the only thing I can think that would improve temps is to remove the front radiator as it is currently exhausting the hot air into the case. Maybe the temps will be better if I take it out and allow the case fans to blow cool air into the case.

What would be your opinions?

Thanks,
Paul

 

[trawetSluaP]

OK thanks.

I know the block and paste are good.

I only have one pump and it has a lot to push through but I run it at 100% so not sure that would be an issue.

Good shout on changing the bottom rad. Will have a go at changing it round.

 

[trawetSluaP]

70c would be too hot for my liking, my 1080ti gets to 42c after a hour of full load.

I'd change the fans on your bottom rad to suck air in to start with and look at repasting and mounting your blocks.

70C is my CPU, GPU gets to a max of 50.

Plan to change the bottom rad to intake.