-
Competitor rules
Please remember that any mention of competitors, hinting at competitors or offering to provide details of competitors will result in an account suspension. The full rules can be found under the 'Terms and Rules' link in the bottom right corner of your screen. Just don't mention competitors in any way, shape or form and you'll be OK.
GTL values and WHAT?
- Thread starter kppanic
- Start date
Deleted member 66701
Deleted member 66701
Depends on what values the other settings end up at.
Yup.
vcore@load: 1.228
PLL: 1.54
VTT: 1.25
NB: 1.22
SB: AUTO
it was prime95 stable for 24hours, passed IBT 10 times, 3dmark, games, has not crashed yet.
Shall I still specify GTL values in this case?
Have a look at this. OK, it's not for you motherboard, it's for mine but it does answer your question
Nice, so basically only vCore, PLL and VTT can damage your CPU,
GTL can be left at AUTO.
Cheers for the response!
Nice, so basically only vCore, PLL and VTT can damage your CPU,
GTL can be left at AUTO.
Cheers for the response!
Is the RAM you have the CH5 DHX? I run mine at the stock 5-5-5-18 so am wondering if I can tighten the timings. What FSB/RAM volts do you run the RAM at and did you have to up the NB to get it stable?
Sorry for all the questions but I run NB at 1.16 or 1.18, can't quite remember which and have to run the RAM at 1.8v else I start getting errors in MemTest86+.
Hey!
the RAM i have is the cheap 6400C5. Not DHX. It's rated at 400mhz 5-5-5-18 but as long as I give it 2.02v+ it does fine in Memtest86+ at 5-5-5-15.
FSB is at 445 and I can't remember NB but it's around 1.16v. SB is 1.2v.
I managed to decrease the NB. I thought I needed it high but apparently it didn't.
Yeah I think I lucked out on RAM, I didn't think I could push these RAMs this much. On the other hand, another set of 2x2gb same RAM i bought a couple of days ago, one of the stick was defective.
