H100I with 120 apache

Associate
Joined
13 Jun 2011
Posts
36
Location
Glasgow, Scotland
I currently have 2 120mm apache fans on my h100I pulling hot out the top of a 600T.
Cpu is FX8350 8core and temps idle are sitting at 11c
however when under load they jump and i mean jump up to 60 - 70 <-- i shut comp down at that point fearing something is broken.
I checked to make sure cpu and cooler were seated correct and all fine.
Are the fans ok or do i need 4? or should i stick to the stock fans that come with the kit?
Help pls
 
I very much doubt that the fans are the problem here.

Is the pump running in the H100?

Are you sure it isn't just a faulty temp sensor?
 
Pump is running as i forgot to plug it in on first run and comp lasted about 10 seconds then shutdown due to overheat.
Is a new mobo so i would hope not a fault.
Sabertooth
It is in a small encosure but i pretty much have a cold vent direct into the front of the case.
 
Hey and yes it is, although it has some turbo option enabled? i have since reset mobo to optimized settings and things have calmed down. Really no clue what was going on.
 
Back
Top Bottom