H50 fan setup

[cycloneuk]

I have the H50 (intake) pulling cooler air onto the rad and was wondering what would be the best setup for the rest of my fans? i have a front intake, side intake and top exhaust, i have a spare 120mm also from the back exhaust that the H50 is now on.

I have 2 spaces spare on the top which are exhausts and one intake on the bottom which i could use the spare fan on.

 

[Evoss]

Hi,

I have this setup:

H50 Intake
Front Intake
Sides Intake
Top Exhaust

I believe this is the best setup as it provides cool air flow.

With your spare fan you can setup push/pull for the H50, just need to get the screws for it.


You need these:

Corsair Blog: http://blog.corsair.com/?p=987


Hope this helps,

Evoss

 

[Randall8686]

or you can just be lazy and use 2 screws each side like i have, this is plenty strong enough i can pull harder than i would want to with no movement at all.

 

[Lunawolfy]

or you can just be lazy and use 2 screws each side like i have, this is plenty strong enough i can pull harder than i would want to with no movement at all.

^^ This.

Just bought two Gentle Typhoons and I plan on doing exactly that, the screws provide enough torque with just two, let alone four, although in a perfect world I'd take four

 

[Randall8686]

^^ This.

Just bought two Gentle Typhoons and I plan on doing exactly that, the screws provide enough torque with just two, let alone four, although in a perfect world I'd take four

its as solid as using 4 i just done 2 corners one side and the other two corners on the other side there is no flez in the fan and obviously none in the rad push pull knocks a few C off so cant be bad