Has nobody
- Thread starter Hyb
- Start date
JumperFree Configuration Settings
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Strap to Northbridge: 333Mhz
FSB Frequency: 375
PCI-E Frequency: 100
DRAM Frequency: DDR2-750
DRAM Command Rate: 2T
DRAM Timing Control: Manual
tCL (CAS# Latency): 4
tRCD (RAS# to CAS# Delay): 4
tRP (RAS# Precharge): 4
tRAS (RAS# Activate to Precharge): 12
tRRD (RAS# to RAS# Delay): auto
tRFC (Row Refresh Cycle): auto
tWR (Write Recovery): auto
tWTR (Write to Read Delay): auto
tRTP (Read to Precharge): auto
DRAM Static Read Control: Disabled
Transaction Booster: Disabled
Clock Over-Charging Mode: Disabled (this is different in BIOS 504-mine,template is of 404)
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Voltage: 1.45v
CPU Voltage Reference: 0.63x
CPU Voltage Damper: Enabled
CPU PLL Voltage: 1.60v
DRAM Voltage: 2.10v
FSB Termination Voltage: auto
North Bridge Voltage: auto
North Bridge Voltage Reference: 0.67x
South Bridge Voltage: auto
Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Disabled
Thats mine with Asus P5K Premium. high end Asus boards usually share similar settings, yours will have several more i'm sure, but that's just to give you a gist of voltages,etc.
AI Overclocking: Manual
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
FSB Strap to Northbridge: 333Mhz
FSB Frequency: 375
PCI-E Frequency: 100
DRAM Frequency: DDR2-750
DRAM Command Rate: 2T
DRAM Timing Control: Manual
tCL (CAS# Latency): 4
tRCD (RAS# to CAS# Delay): 4
tRP (RAS# Precharge): 4
tRAS (RAS# Activate to Precharge): 12
tRRD (RAS# to RAS# Delay): auto
tRFC (Row Refresh Cycle): auto
tWR (Write Recovery): auto
tWTR (Write to Read Delay): auto
tRTP (Read to Precharge): auto
DRAM Static Read Control: Disabled
Transaction Booster: Disabled
Clock Over-Charging Mode: Disabled (this is different in BIOS 504-mine,template is of 404)
CPU Spread Spectrum: Disabled
PCIE Spread Spectrum: Disabled
CPU Voltage: 1.45v
CPU Voltage Reference: 0.63x
CPU Voltage Damper: Enabled
CPU PLL Voltage: 1.60v
DRAM Voltage: 2.10v
FSB Termination Voltage: auto
North Bridge Voltage: auto
North Bridge Voltage Reference: 0.67x
South Bridge Voltage: auto
Advance CPU Settings
CPU Ratio Control: Manual
- Ratio CMOS Setting: 9
C1E Support: Disabled
Max CPUID Value Limit: Disabled
Vanderpool Technology: Disabled
CPU TM Function: Disabled
Execute Disable Bit: Disabled
PECI: Disabled
Thats mine with Asus P5K Premium. high end Asus boards usually share similar settings, yours will have several more i'm sure, but that's just to give you a gist of voltages,etc.
Permabanned
- Joined
- 19 Jun 2007
- Posts
- 10,717
- Location
- InURmama
Yes, I had 2000FSB + 1000mhz Memory @ 4.5GHZ, then backed down to 4GHZ as of my Quiet Cooling.
I got rid of it as its a POS and worst bugs than the Striker Extreme but I cant remember all bios settings and wrote voltages down.
If your still in need after above just ask.
I got rid of it as its a POS and worst bugs than the Striker Extreme but I cant remember all bios settings and wrote voltages down.
If your still in need after above just ask.
Last edited:
Right chaps Ive just tried them setting and it wont even post no beep nothing!
SO helmutcheese plz help can ya post setting for 3ghz maybe 3.2!
My spec is Q6600 Quad GO,Striker2formula 780,reaper pc-9200 2 gig err 8800gtx sli if matters cpu is on water and bios is1001
cheers
SO helmutcheese plz help can ya post setting for 3ghz maybe 3.2!
My spec is Q6600 Quad GO,Striker2formula 780,reaper pc-9200 2 gig err 8800gtx sli if matters cpu is on water and bios is1001
cheers
Permabanned
- Joined
- 19 Jun 2007
- Posts
- 10,717
- Location
- InURmama
Hmm, although its better than the Striker Extreme for Quads, its still not ideal and I was on a Dual core and my CPU was a E8500 so was nearly 3.2GHZ at stock.