Having bit of trouble with new build.

Smokey26

Smokey26

Smokey26

Associate
Joined
18 Apr 2010
Posts
1,320
Location
West Midlands
Hi everyone. Got all my parts delivered today and almost done, just a little confused with the case fans and rgb setup. I have a phanteks P400a and a msi tomohawk mobo so a pretty common setup I'm sure. Got everything plugged in except the fans. I dont understand what iam meant to do with them. Where do the fans themselves plug in and how are they controlled speed wise. Also the cable labelled mb rgb 3 pin won't fit on either of my mobo headers because they have 4 mins. Pretty much all I'm stuck on.

Thanks.
 
I have plugged the 3 front fans into the mobo, assumed there would be a split thing so all 3 went into 1 but I still can't plug in the rgb 3 pin connector as the mobo is 4 pin. It has 2x 4 pin for rgb, mine is 3 pin and the missing bit is solid plastic. Hmmmm
 
JollysH1 said:
Hey, unfortunately I've just spent about 5 days looking at every single connector/socket/system/type/adapter/converter for this type of issue! mine is solved now, but if you want to cut down on 5 days of research for solutions, post a pic of the plug you have, and I'll cross reference it on my charts (Yes I am that anal) and give you your best options.
Click to expand...

Hi, thanks for reply. The male connector I assume is to put other fans in the chain. The female one is confusing me. Also I have plugged the SATA cable into my PSU, which I thought would make the RGB lights work, but it doesn't, only the lights on the power button work.

20180731_223645.jpg.3e116987f5d65b98bf53dcdf182bebf3.jpg


url
 
Yeah I cant connect it. The 400s is a different case, it doesn't come with a mesh front, which is why I wanted this one. This is stupid why not just use 1 standard and stick to it?

Ok that remote is cheap on ebay, ill get it. Does that mean I cant control the lights on the case? What is the SATA cable for on my case? it appears to be doing nothing.

Thanks mate.
 
Mcnumpty2323 said:
The case lights if connected right
May be in the off position
Holding down one of the buttons on the front of the case for few seconds turns them on/off
On my enthoo luxe and 719 so am assuming your case may be similar
Click to expand...

Tried that. Only works on the power button. Ive got a reset button, and 2 others, which change the colours and stuff but only on the power button. Iam wondering what that SATA power does? Maybe its hooked into the wrong modular plug on PSU? I aint fussed about software controlling them at all.
 
You must log in or register to reply here.
Back
Top Bottom