Having trouble installing my sub!

[lolage]

Hi guys

I bought a Fli Trap sub, I've installed the battery wire, the earth wire and the low input wires.

The only one I have not done is the remote one. I presumed I could get away with using my sub without his for the time being but it appears not? Where does this go? I have been told it should go into my head unit, but I cant seem to find a port despite my head unit being quite new..?

Any ideas? Heres a picture from the manual: http://dl.dropbox.com/u/11365869/stupidsub.png

I have done it all apart from the "rem" bit. My head unit is a Kenwood 4047u.

Thanks!

 

[lolage]

I've got that blue wire which came with the sub, but I can't see anywhere for it to go in my head unit...

 

[lolage]

This is what I've done with mine, really need to get around to sorting it properly but it does the job as long as I remember to unplug it overnight!

Not sure if it matters, but if it does: I bought a sub which has an amp built in!

 

[lolage]

You could also put the remote on an unused switch in your car, tap into a 12v source run blue wire to the switch then from the switch to the amp , flick switch and profit. Just remember to turn it off after your done otherwise you'll end up with a dead Battery unless the amp has an auto shutdown feature when not receiving signals

i used to do this on my old car i had 6 switches for my amps so they came on in order and progressively louder

is it the fli trap 12 by the way ?

Cool, ok. I'll have a look tommorow. Also, yes it is the fli trap 12. Any opinions on it?

 

[lolage]

I have found a blue wire labeled

P.CONT
and
ANT.CONT

Is this it?

 

[lolage]

Works now, cheers dudes! Very happy! =)