Hazro 24" + Ergotron MX arm for 24"+ ordered!

  • Thread starter Thread starter mrk
  • Start date Start date

mrk

mrk

mrk

Man of Honour
Joined
18 Oct 2002
Posts
105,246
Location
South Coast
Ergotron MX arm is an additional model to the LX arm but now supporting a bit over 13KG of screenage. I needed this one to come out for my Hazro as the LX wasn't strong enough to support the 24" !

Spec Page:
http://www.ergotron.com/tabid/71/ctl/Product/mid/396/PRDID/56/language/en-US/default.aspx

Will post back tomorrow evening as it is shipping via next day del @ £106 (£9.99 del :()

It was £85~ many places but none of them had any stock, the only place that had stock were the big names ready for next day del but obviously at £91~ plus postage and I really wanted to have a play over the weekend before deciding if I want to keep it or not!.

Others with a Hazro, to get the VESA mounting bracket you'll need to contact Hazro, IIRC it's cheap at around £10 or so (or was!).

Will post pics tomorrow too :)
 
Nope won't be a problem, 5" is more height than the stock stand on the screen anyway and all I want it for is to be able to move the monitor around when watching from the armchair or to show a photo presentation etc.
 
>>Others with a Hazro, to get the VESA mounting bracket you'll need to contact Hazro, IIRC it's cheap at around £10 or so (or was!).

I am trying to get in contact with Hazro about the vesa bracket for several months now, but i don't get a reply on this.

Cause i understand without the bracket i can't use any vesa mount.
 
Hmm that's strange, Have you tried contacting the stores that sell Hazro screens to see if they can confirm anything?
 
mrk said:
Nope won't be a problem, 5" is more height than the stock stand on the screen anyway and all I want it for is to be able to move the monitor around when watching from the armchair or to show a photo presentation etc.
Click to expand...

Just seems rather limited, especially the fact it cost over 100 quids.
I fancied one of these myself, but 5 inch`s up and down just isn't enough for me ( ooo errr ). Unless that's 5 inches from a set start point as mine sits on a 3 inch platform making the screen 7 inch above my desk.
 
It came!

pc_ergotron_unboxed.jpg


The height adjustment is pretty high, maybe another 5" or so higher adjustable than the default Hazro height on the stand so this is good, pivot and movement seems very good too but will need to install it first to find out really how useful it is :D

Will post back in a bit after it's set up!


P.S.
Wish I got the Silver Hazro now lol, will probably spray the Ergotron matt black if I decide it's a keeper though so will work out in the end I'm sure :)
 
OK all set up and gotta say I love it!

The height is perfectly fine as well which is a bonus for me, the main thing was reach and movement which it does perfectly, can watch from the armchair or from bed no problems. So impressed in fact I'm going to get a wallmount Ergotron for the 32" Samsung in the games room :D

Pics:

lowest:
pc_ergotron_height_lowest.jpg


highest:
pc_ergotron_height_highest.jpg


portrait:
pc_ergotron_portrait.jpg


arm extended:
pc_ergotron_side_open.jpg


arm retracted:
pc_ergotron_side_closed.jpg


good for keeping the probe on while calibrating too :D
pc_ergotron_calibration.jpg


base:
pc_ergotron_base.jpg


Thinking back to when I had the LX, I don't think you will get much height adjustment on any arm really with a 24" screen due to them being so big - you'd need an arm with an extra long...arm and the cost would be beyond £100 I'd imagine too.
 
Last edited:
Looks very nice. How deep is the under cut on this arm, the dimension that hooks under the desktop surface?
 
You must log in or register to reply here.
Back
Top Bottom