HDMI over Ethernet (4K)

mattyg

mattyg

mattyg

Soldato
Joined
17 Jun 2007
Posts
9,429
Hi guys..

I'm looking at moving my AV equipment to a central position...

Does anyone have experience with decent HDMI to Ethernet extenders. If poss I'd rather be able to get away with using 1 cable.. I have two to most places but I wanted to keep one for network.

I don't have a budget but dont want to spenf £1k if I can get away with half... Would be even better if it could go through my home network rather than direct.

Ideally scaleable too so I can add to 5-6 or 7 rooms

Home network is fully managed ubiquiti unifi stuff..With 2 AP's

Any thoughts

Cheers
 
Simmz said:
If you were doing it to one room then it could be done fairly cheap, but as you want 5-7 rooms then unfortunately it’s going to be costly as each extender alone is going to set you back about £100 if you want a proper 4K hdr system etc.
Click to expand...

It'll be each room as we go along so factoring another £100 into a room budget isn't to bad... Whats worse is almost finishing a renovation and the mrs wanting to swap rooms around dining room into TV lounge ....Thats gonna cost more....lol
 
Some runs may be 20-30 feet. I don't really mind paying for the good stuff.. But I dont want to be paying Beckhams prices if I can avoid it...
 
jpaul said:
(from earlier thread)the price is exhorbitant hdanywhere for 4k eg £1k for 4 screens
  • Max. Resolution UltraHD / 4K / 2160p to HDMI 2.0a and HDCP 2.2 standard for a maximum of 4K60 8bit 4: 2: 0 or HDR10 format with 4K24 10bit 4: 2.0
  • Maximum transmission distance 40m at 4K / UltraHD or 70m at FullHD / 1080p - including PoE (bi-directional)
  • Supports all audio formats including Dolby Atmos and DTS: X
  • HDBaseT Lite functions up to 40m at 4K or 70m at 2K: transmission of uncompressed A / V signals as well as USB, control signals and network (Ethernet)
... can you not use plex/kodi from a media server (people are ripping 4k discs for personal use too)
Click to expand...

That might be exactly it..Not cheap though is it....To be honest its mostly for SKY (I know) Another 4 mini boxes is going to cost £400 so its not a big stretch to go for the above system.

Thanks
 
lucid said:
You can have 4 mini boxes, but you can't use more than two at any one time.... Did you know that?

Also, minis are 1080p max. There's no plans to make a 4K mini anywhere in Sky's future right now. Stupidly, IMO, they just don't see a requirement for it. As of this moment then, what you're really looking at is one 4K box tethered to a couple of main 4K TVs that you watch one or the other, but not both at the same time. That then leaves you with 2 minis at 1080i/p to distribute to service the rest of the house. Since these max out at 1080p then there's little point paying for 4K hardware to hang off the ends of some Cat6 cable, you might as well save the money today and buy 1080p HDBaseT TX/RX kits and wait for the prices to fall on 4K gear ready for when there's some proper sources to pipe in to it.

One fly in the ointment is control. The Q box and the minis all use the same IR codes. You're going to have to plan the system so that IR signals don't bleed on to more than one device.
Click to expand...

Thanks Lucid... There are only two of us in the house so watching more 3 or more at once is unlikely... We have/will have 2 4k Tv and the rest will be 1080's I've still got my 2 Kuro's. My thinking was I need to get 4k to the 4k tvs but they wont be used at the same time. Apart from maybe Netflix etc If the limitation is only 1 4k then we will have to work around who watches what.

These TV's are wall hung so I don't want cables on show which is why we were thinking ethernet...
 
darkblade said:
I can recommend RuiPro Hybrid Fibre HDMI cable if you want to consider direct 4K connections.
Click to expand...

No chance for direct connections anymore.... Tiles are down and plastering is done.. House almost finished and the wife makes changes..............Women!!!!
 
bledd said:
HDMI over ethernet
HDMI over IP

Very different beasts.

My only experience is with cheap HDMI over ethernet, flaky at best.
Click to expand...

Yuupp....... I should have researched it a little better...... HDMI over ethernet wont go through my switches HDMI over IP would..


Any recommendations......
 
I've got it to work by "Direct" connection in/out from the patch panel. So it works. But I'll be going down the IP route as soon as I can. 7 bed 3 Reception rooms in the main house plus more TV's in the games room and then the cinema room but That'l be dedicated equipment when that gets done.
 
You must log in or register to reply here.
Back
Top Bottom