Help choosing case for new build

[ijb1989]

Hi guys

So far I've bought the following:

AMD Ryzen 5 5600X
ASUS ROG Strix B550F
Corsair Vengeance 2x16GB DDR-4 3600MHZ CL18
ADATA XPG SX8200 1TB M2 2280 NVME SSD
Seagate Baracuda 2TB 3.5" 7200RPM HDD
Corsair 750W Fully Modular Power Supply

I will wait until the CPU arrives before deciding whether I'll need an additional cooler, but will potentially also be getting a Scythe Mugen 5 or Dark Rock Pro 4 cooler so need to make sure either will fit:

Mugen WxHxD:
130 x 154,5 x 110 mm
http://www.scythe-eu.com/fileadmin/images/CPU-Cooler/Mugen-5/Dimensions.jpg

Dark Rock Pro:
(L x W x H), (mm) 145.7 x 136 x 162.8
https://www.bequiet.com/en/cpucooler/1378

I will also either be getting a 6800, 6800xt, 3070 or 3080:

3070: Length 9.5" (242 mm) || Width 4.4" (112 mm) || Slot 2-Slot
3080: Length 11.2" (285 mm) || Width 4.4" (112 mm) || Slot 2-Slot
6800: Length 267 mm || Slot 2 slots
6800 XT: Length 267 mm || Slot 2.5 slots

Based on the above, can someone provide any help or advice on a decent mid-tower case? I've not built a PC before so a bit of space to build in would be preferable but not a deal breaker. I'd also quite like a seethrough panel but again, not massively bothered - I do want to have USB slots at the front or on the top & would like decent ventilation too

Any help appreciated!

 

[Grimley]

Phanteks P600S ticks all your boxes.

 

[ijb1989]

Phanteks P600S ticks all your boxes.

Thanks mate - i'll check that. Also been recomended the Meshify C, Meshify 2, P400A Digital RGB and Lian Li Lancool 2. Is there much difference between those 5 units do you know?

 

[Grimley]

They will all be similar as their design will be focused on airflow. None of them are bad cases. On looks alone I'd pick the Lancool 2 if it were my choice.

 

[ijb1989]

Thanks for your replies - appreciate it